Fix Epson Ink Pad Needs Service & Canon Error 5B00
How to reset Epson L4168 when “Ink Pad Needs Service” appears

How to reset Epson L4168 when “Ink Pad Needs Service” appears

If your Epson L4168 displays Error E11, Service required, or the warning “Ink Pad Needs Service”, the waste ink counter has reached its limit. With WicReset Connect, you can reset it in 2 minutes and restore printing. Works on Windows 7–11 via USB. Reset keys start from 6 EUR.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Symptoms – Epson L4168

  • Printer stops printing, LEDs flashing.
  • Error message: “Service required” or “Error E11”.
  • May also show: “Ink Pad Needs Service”.

Why Epson L4168 shows Service Required

The printer tracks waste ink in a waste ink counter. When the limit is reached, Epson L4168 blocks printing. Resetting the counter with WicReset Connect restores normal use. It doesn’t always mean pads are physically saturated.

Quick facts – Epson L4168 reset

ModelErrorSolutionOSReset time
Epson L4168Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ WicReset Connect

No verified official Epson driver found for L4168 yet.

Video guide

▶ Watch WicReset tutorial

Available in 10 languages with narration.

Reset steps for Epson L4168

  1. Connect Epson L4168 to your PC with a USB cable.
  2. Run WicReset Connect and confirm the printer is detected.
  3. Enter your purchased reset key and press Reset.
  4. Wait ~2 minutes, power off for 10 seconds, then restart.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson L4168

Does reset remove Error E11 / Ink Pad Needs Service?

✅ Yes — resetting clears the counter and printing resumes.

Are the ink pads physically full?

Not necessarily. The error is triggered by usage counters.

Can reset be done wirelessly?

❌ No — only USB is supported.

Which OS are supported?

Windows 7, 8, 10, 11 (USB only).

Tips for Epson L4168 reset

  • Reset around 95% usage, not after total lock.
  • Limit unnecessary head cleanings.
  • Always use a good quality USB cable.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

Related Epson models

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.