Resetting Epson WorkForce 325 – Clear Waste Ink Counter & Resume Printing
Got Ink Pad Needs Service on Epson WorkForce 325? The waste ink counter reached its threshold. Reset via WicReset Connect with a key (from 6 EUR). Takes ~2 minutes over USB on Windows 7–11.
What You’ll See on Epson WorkForce 325
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson WorkForce 325 stops
Epson WorkForce 325 stops to protect against possible overflow when the waste ink counter is high. A reset lifts the lock and printing resumes. The message can appear before pads are physically saturated.
Quick facts – Epson WorkForce 325 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson WorkForce 325 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson WorkForce 325. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson WorkForce 325
- Connect Epson WorkForce 325 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson WorkForce 325
Do I need to open the case?
❌ No — no disassembly required.
Can reset fix banding or clogs?
No — do nozzle checks/cleanings for quality issues.
Can I share a key between PCs?
The key is consumed by the reset action, not by the PC.
What if power is lost during reset?
Retry after reboot; ensure stable power and USB.
Is support for EcoTank models?
Yes — many L-series/ET-series are supported (check list before purchase).
Tips for Epson WorkForce 325 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson WorkForce 325 reset instructions using WicReset Connect.