Epson XP-423 Resetting – Fix Service Required / Error E11
Your Epson XP-423 may halt with Error E11 or Service required when the waste ink counter is full. Clear it using WicReset Connect in about 2 minutes. Keys start at 6 EUR. Windows 7–11 (USB).
Typical Signs on Epson XP-423
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson XP-423 stops
Reaching the waste ink counter limit makes Epson XP-423 display E10, E11, E12, E91/Service required. A reset typically restores service with no hardware swap.
Quick facts – Epson XP-423 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson XP-423 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson XP-423. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson XP-423
- Connect Epson XP-423 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson XP-423
How do I prepare for reset?
Install drivers, use a quality USB cable, run as admin.
Do I need to uninstall other Epson tools?
No — just close them during the reset.
Can the reset fail on unsupported models?
Yes — always verify compatibility before purchase.
Will reset clean print heads?
No — it only affects the waste ink counter.
Can I print a test page after reset?
Yes — recommended to confirm normal operation.
Tips for Epson XP-423 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson XP-423 reset instructions using WicReset Connect.