Oprava chyby 5B00 inkoustového polštářku Epson potřebuje servis a Canon

Epson L3158 Reset – Solve Service Required / Error E11 Quickly

If your Epson L3158 stops printing with Chyba E11 nebo Požadovaná služba, you can reset the počítadlo odpadního inkoustu in minutes using WicReset Connect. Works on Windows 7–11 via USB. Reset key price starts from 6 EUR.

🔑 Koupit klíč WicReset Connect (od 6 EUR)

The L3158 is part of Epson’s EcoTank series. After heavy use, the printer may suddenly lock itself due to the počítadlo odpadního inkoustu reaching 100%. Pads are rarely full – it’s a software limitation. Resetting with WicReset Connect restores full printing functionality in minutes.

Download WicReset Connect & Original Driver

Before resetting, make sure you have both the reset program and the correct driver installed:

⚠️ If the driver link does not work, search "Epson L3158 driver download" on Google and use the first official Epson website result.

Common symptoms on Epson L3158

  • Printer shows “Požadovaná služba” message.
  • Chyba E11 during printing tasks.
  • Flashing red LEDs and printing stops.

Why Epson L3158 shows Service Required

The waste ink counter reaches its maximum limit after a number of cleanings and prints. At 100% the L3158 locks. Resetting the counter with WicReset Connect clears the error and allows printing again.

How to reset Epson L3158 step by step

  1. Stáhnout WicReset Connect and install it on your PC.
  2. Connect Epson L3158 to the PC via Kabel USB (reset not possible via Wi-Fi).
  3. Run the program and check if the printer is detected.
  4. Zadejte zakoupený resetovací klávesa (from 6 EUR) and press Obnovení.
  5. Wait about 2 minutes until the process is finished.
  6. Restart the printer – turn it off for 10s and then on again. Error should disappear.
👉 Full illustrated guide with screenshots & video: WicReset Connect Epson Manual

🔑 Get your reset key now (6 EUR)