Epson XP-204 Reset: Fix the Service Required Error
Fix the Epson XP-204 Service Required or waste ink pad warning with the official Wic Reset Connect solution. Download the reset program free, connect the printer directly by USB and use one activation key to clear the supported counter. The guided procedure usually takes about two minutes and does not require specialist service equipment.
Connect, verify and clear the counter
You need a Windows 7-11 computer, a reliable USB printer cable and one Wic Reset Connect activation key.
Clear the waste ink counter and unlock the printer
The Epson XP-204 records ink used during print-head cleaning in an electronic waste ink counter. After the programmed limit is reached, the printer may display a Service Required message and stop printing. Wic Reset Connect writes a cleared value to the supported counter after a valid activation key is entered. The application is free to download; one key completes one reset on one supported printer.
Get the activation key and current software directly from the official Wic Reset Connect developer.
Eligible interrupted attempts can be repeated after the USB, driver or communication problem has been corrected.
An unused activation key does not expire, so it can be kept until the XP-204 is ready for reset.
After payment, automatic email delivery normally takes around one minute.
Complete the XP-204 ink pad reset in three stages
Always read the counter in WIC Reset Utility before using the key. A successful reading confirms the selected XP-204 and helps prevent an interrupted reset caused by unstable USB communication.
Order one activation key
Purchase one Wic Reset Connect activation key for the Epson XP-204. Each key is designed for one completed reset on one supported printer.
Install the two free programs
Download WIC Reset Utility and Wic Reset Connect without charge. Connect the powered-on XP-204 directly by USB and confirm its current counter reading.
Perform the activation reset
Choose the detected XP-204 in Wic Reset Connect, paste the delivered key and start the reset. When the program confirms success, turn the printer off for about 10 seconds before restarting it.
The software reset usually takes about two minutes. Use the official video guide for every click. Assistance is available 24 hours a day if a cable, USB port, original driver or active Epson process blocks communication.
Purchase the XP-204 keyConfirm that the warning concerns the waste ink system
This reset is intended for Service Required, ink pad end-of-life and waste ink counter warnings. It will not repair an unrelated cartridge, scanner, paper-feed, carriage or mechanical error.
The XP-204 stores an estimated waste ink value in internal memory. Cleaning or changing the physical absorber alone does not clear that stored counter.
The absorber collects real waste ink, while the printer tracks estimated use electronically. After physical maintenance, the stored limit still requires a software reset.
When WIC Reset Utility shows 0% but another error continues, the ink pad counter was reset successfully and the remaining fault must be diagnosed separately.
Visible ink leakage requires physical service before normal use. Reset software changes only the electronic value and cannot repair a full absorber, loose tube or damaged component.
How to clear the Epson XP-204 waste ink counter
Disconnect other printers and leave only the Epson XP-204 attached. Use a direct motherboard USB port; do not perform the protected write through a hub, splitter or docking station.
Prepare Windows and the printer
Power on the XP-204, clear every pending document from the print queue and connect it with a working USB data cable. Install the original Epson driver if Windows does not identify the printer correctly.
Read the counter before activation
Start WIC Reset Utility, select the XP-204 and perform a counter reading. Enter no key until the printer remains detected and a waste ink value is displayed.
Start Wic Reset Connect
Open the current Wic Reset Connect version and select the detected Epson XP-204. If the activation field disappears, communication has been lost and must be restored first.
Paste the delivered activation key
Copy the full key from the delivery email into Wic Reset Connect and begin the procedure. Keep the printer switched on and do not disconnect USB while the counter is being written.
Power-cycle the XP-204
After success is reported, switch the XP-204 off using its power button. Wait approximately 10 seconds and turn it back on to load the cleared value.
Verify the cleared counter
Open WIC Reset Utility again and read the value. A 0% or cleared result confirms that the Epson XP-204 reset completed correctly.
Choose your language and follow every reset step
The official guide shows how to connect the Epson XP-204, check communication, read the counter, enter the activation key and verify the result. Ten language versions are currently available, and further languages are added regularly when customers request them.
Read the counter with Utility. Perform the reset with Connect.
Both downloads are free, but they perform different tasks. WIC Reset Utility checks the printer and reads the counter; the purchased activation key must be used only in Wic Reset Connect for the final reset.
WIC Reset Utility
Run this utility before using the key to verify detection and read the current ink pad counter. Run it again after restarting the printer to confirm the cleared result.
Download WIC Reset UtilityObnovení funkce Wic Connect
Wic Reset Connect performs the protected counter write. Download it free, choose the connected XP-204 and enter one purchased key for one reset on one printer.
Download Wic Reset ConnectOfficial XP-204 reset with support and guarantee
WicReset.info develops and sells Wic Reset Connect. The Epson XP-204 procedure is designed for normal users, and assistance is available 24 hours a day when detection, the original driver, a USB port or an Epson background process interrupts communication.
The reset guarantee includes a documented recovery path for eligible interrupted attempts after the connection problem has been fixed. Follow the official manual and request a replacement key only through the provided procedure.
Fix communication before entering the key
Use the activation key only after WIC Reset Utility reads the counter successfully. When detection is unstable, check the USB cable, motherboard port, original Epson driver, pending documents and active Epson Status Monitor processes first.
The activation-key box disappears
The computer has lost communication with the Epson XP-204. Close the program, reconnect the cable to another direct motherboard USB port and wait for Windows to detect the printer. Test another USB data cable or another Windows computer if the field still disappears.
WIC Reset Utility cannot read the XP-204 counter
Make sure the printer is powered on, selected and connected without a hub. Clear the print queue, install the original Epson driver and close Epson Status Monitor. In WIC Reset Utility, open Support, choose Disable processes and select Terminate all.
The printer is connected only through Wi-Fi
Connect the XP-204 directly with a USB data cable for the reset. Wi-Fi can be used for normal printing, but it is not suitable for the protected service counter write.
The reset stopped after the key was used
First correct the communication problem. Then follow the official replacement-key procedure and repeat the reset with one printer connected through a stable direct USB port.
The waste ink value is 0% but the printer still shows an error
The counter reset succeeded, so another fault may remain. Switch the XP-204 off for about 10 seconds, restart it and check cartridges, paper feed, carriage movement and indicator lights.
Waste ink is visible under or inside the printer
Stop using the printer and service the physical absorber, tubes or other affected parts. Reset software changes the stored counter but cannot stop a physical ink leak.
Check the final Epson XP-204 reset result
After Wic Reset Connect confirms completion, turn the Epson XP-204 off for about 10 seconds and power it on again. Read the counter in WIC Reset Utility; a 0% or cleared value verifies the reset.
Keep USB connected until the verification reading and a normal printer start are complete. The printer can then return to its usual everyday connection.
Epson XP-204 resetter FAQ
How do I reset the Epson XP-204 ink pad counter?
Connect the printer directly to a Windows computer by USB, read the counter with WIC Reset Utility, then enter one activation key in Wic Reset Connect and complete the guided reset.
Is there an Epson XP-204 resetter download?
Yes. Wic Reset Connect is the official reset program and is free to download. A purchased activation key is required for the final waste ink counter reset.
How long does the XP-204 waste ink reset take?
The software procedure normally takes about two minutes once the Windows computer, direct USB cable, printer and activation key are ready.
Can I reset the Epson XP-204 using printer buttons?
No. A restart or button combination does not clear the protected electronic waste ink counter. Use Wic Reset Connect through a direct USB connection.
Can the XP-204 be reset over Wi-Fi?
No. The service procedure requires a stable USB data connection to a computer running Windows 7, 8, 10 or 11.
Does replacing the ink pads remove the Service Required message?
Not always. The warning is also stored in the printer's internal counter, so the software reset is still required when that value has reached its limit.
Why must I read the counter before entering the key?
The reading confirms the correct printer model and stable communication before the protected reset begins. It is a quick safety check, not a separate repair.
Does an unused Wic Reset Connect key expire?
No. An unused activation key has no expiry date and can be kept until the Epson XP-204 and Windows connection are correctly prepared.
What should I do if the XP-204 is not detected?
Use another direct USB port, remove hubs, clear the print queue, install the original Epson driver, close Epson Status Monitor and try a different data cable or Windows computer.
Is support available after purchase?
Yes. Assistance is available 24 hours a day for common printer-detection, cable, driver and setup problems, and an official recovery route is available for eligible interrupted resets.
Which Epson XP-204 instruction languages are available?
The current video guide is available in English, German, French, Italian, Polish, Dutch, Czech, Romanian, Spanish and Hungarian.
Can another instruction language be added?
Yes. New language versions are added regularly in response to customer requests. Contact support when the language you need is not yet listed.
Reset the counter with the official software
Buy one official key, download Wic Reset Connect free and follow the current video guide. Instructions are available in 10 languages, new versions are added on customer request, unused keys do not expire and assistance is available 24 hours a day.
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська