Find Your Supported Epson or Canon Printer
Enter the exact printer model or part of its name. The supported printer list filters instantly as you type.
supported Epson and Canon models
Use the model printed on the front label or Windows printer name.
A visible model chip confirms that it is included in this supported list.
Download Wic Reset Connect and use one key for one completed reset.
Check your exact printer model
Search by the full model or a partial code, for example ET-2810, XP-245, G3410 or TS3350.
1.835 supported models
EPSON
951 modelsNo supported model found
Check the exact spelling and model number. Try a shorter code without spaces or hyphens.
Confirm compatibility first, then complete the reset
Wic Reset Connect is the program used for the protected reset. The download is free. One activation key completes one reset on one supported Epson or Canon printer.
- Windows 7–11 computer
- Direct USB connection, not Wi-Fi
- Only one printer connected
- One key for one completed reset
Continue with Wic Reset Connect
Download the official program, review the instructions and purchase a key only after confirming the exact model.
Buy the official reset key Wic Reset Connect herunterladen Open Epson reset instructions Open Canon service mode instructionsSupported printer search FAQ
How should I search for my printer?
Enter the model code printed on the printer, such as ET-2810, XP-245, G3410 or TS3350. A partial code also works.
What does it mean when my model appears?
It means the model is included in this supported-printer database. Continue with the correct connection and reset instructions for Epson or Canon.
Can I perform the reset over Wi-Fi?
No. Use a direct USB data connection to a Windows 7–11 computer.
Can one activation key reset several printers?
No. One activation key completes one reset on one supported printer.
Does an unused key expire?
No. An unused activation key has no expiry date before use.
What should I do if the model is not listed?
Check the full model code and try a shorter search. Do not purchase a key until compatibility is confirmed.
Was Sie brauchen
- WicReset Connect-Taste (nur etwa 6 € - die billigste Option)
- Windows-PC
- USB-Kabel
Erforderliche Zeit
Etwa 2 Minuten
Schwierigkeitsgrad
Sehr leicht
Funktioniert bei Fehlern
- Epson: E10, E11, E12, E91 und ähnliche Servicefehler
- Kanone: 1700, 5800 und ähnliche Tintenabfälle / Supportcode-Fehler
- Meldungen wie “Abfalltintenzähler voll”, “Tintenkissen am Ende seiner Lebensdauer”
Unterstützte Druckerserien
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-Serie, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF und viele andere beliebte Serien.
Epson Tintenkissen Service zurücksetzen
Wenn Ihr Epson Meldungen anzeigt wie “Das Stempelkissen ist am Ende seiner Lebensdauer”, “Stempelkissen-Service erforderlich” oder “Abfall-Farbkissen voll”, können Sie den Epson-Tintenkissen-Service zurücksetzen mit einem WicReset Connect Schlüssel. Das Programm setzt den internen Tintenverbrauchszähler zurück, so dass der Drucker wieder funktioniert, ohne dass ein Service-Center aufgesucht werden muss.
- Behebt die Warnungen “Epson Tintenkissen-Service” / “Service erforderlich” in wenigen Minuten.
- Arbeitet als Epson Tintenkissen Service zurücksetzen Lösung für die meisten EcoTank-, L-Serien-, ET-Serien-, XP-, WF- und Stylus-Drucker.
- Kein Hardware-Resetter erforderlich - nur ein Windows-PC, ein USB-Kabel und WicReset Connect.
FAQ (kurz)
F: Muss ich das physische Stempelkissen ersetzen?
A: In den meisten Fällen zu Hause und im Büro setzen Sie mit WicReset Connect nur den Zähler für verbrauchte Tinte zurück und verwenden den Drucker normal weiter.
F: Ist dies eine einmalige Rückstellung?
A: Jede Taste setzt den Zähler einmal zurück. Sie können den Vorgang in Zukunft mit einer anderen Taste wiederholen, wenn die Meldung erneut erscheint.