Canon MG5300 – Waste Ink Counter Reset

Canon MG5300 service mode reset – clear waste ink counter and fix error 5B00

Canon MG5300 printers use an internal waste ink counter that eventually reaches the maximum value and disables the device with errors like 1700, 5B00 or 5B02. With WICReset Connect, you can reset this counter at home and continue printing.

Buy Canon Reset Key (from 6 EUR) Video Instructions & Download
Find Supported Canon Models
Quick Summary
  • Enter service mode on Canon MG5300
  • Download & install WICReset Connect
  • Connect your printer via USB
  • Reset takes about 2 minutes
Required Step

How to Enter Service Mode on Canon MG5300

Follow this exact sequence:

  1. Turn off your Canon printer.
  2. Press and hold the RESET button on your Canon printer.
  3. Press and hold the printer’s POWER button (wait a moment for the printer to turn on).
  4. Release the RESET button but continue to hold the POWER button.
  5. While holding the POWER button, press and release the RESET button 6 times.
  6. After pressing and releasing the RESET button the specified number of times, wait a moment before releasing the POWER button.

How to Reset Waste Ink Counter on Canon MG5300 – Step-by-Step

Step 1 – Download WICReset Connect

Click the button below to download WICReset Connect for Canon printers:

Download WICReset Connect
Step 2 – Enter Service Mode & Connect via USB
  • Ensure Canon MG5300 is in service mode.
  • Connect to your PC using a USB cable.
  • Wi-Fi is not supported for resetting.
Step 3 – Open WICReset Connect
  • Open WICReset Connect as Administrator.
Step 4 – Enter Your Reset Key & Click RESET
  • Buy a reset key using the button below.
  • Enter the key in the program.
  • Click RESET to start the operation.
Buy Canon Reset Key

The reset takes about 2 minutes.

Step 5 – Restart Printer
  • Wait until the program confirms completion.
  • Turn the printer off for 10 seconds.
  • Turn it back on — errors should disappear.

Canon MG5300 Error Codes Explained

  • 5B00 – waste ink absorber full
  • 1700 – ink absorber almost full
  • 5B02 – ink absorber full (reset required)

These errors do not mean your Canon MG5300 is damaged. It only means the internal waste ink counter reached 100% and must be reset.

WICReset Connect resets the counter safely in about 2 minutes.

Video Instructions – Canon Reset Tutorial

Watch the official Canon reset tutorial with voice-over and step-by-step explanation:

Open Video Instructions (Canon)

Available in 10 languages. Follow the video for a fast, safe reset.

FAQ – Canon MG5300 Reset

What is a waste ink counter?

It’s an internal counter that tracks how much waste ink was collected.

Why does the Canon MG5300 stop printing?

When the counter reaches the limit, the printer locks for safety.

Do I need any special cables?

Just a standard USB cable is required.

Can I damage the printer during reset?

No, the reset is software-based and safe.

Do I need to reinstall drivers?

Typically no, Windows detects the printer automatically.

Reset Your Canon MG5300 Now

Start the reset process for your Canon MG5300 and remove all waste ink related errors instantly.

Buy Reset Key Supported Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.