Fix Epson Ink Pad Needs Service & Canon Error 5B00

L3153 Reset Epson – Quick & Proven Fix for Error E11 / “Service required”

If your Epson L3153 stops printing and shows Error E11 or “Service required”, you need a L3153 Reset Epson. Solve it in minutes with WicReset Connect. Works on Windows 7–11 via USB. Reset key available from 6 EUR.

🔑 Buy WicReset Connect key (from 6 EUR)

The Epson L3153 has an internal waste ink counter that estimates ink absorbed during cleaning cycles. When the counter reaches 100%, the printer locks itself to prevent overflow. Pads are usually not physically full – this is mainly a software protection. You can unlock the printer with a simple L3153 Reset Epson using WicReset Connect.

Symptoms that require L3153 Reset Epson

  • Message on screen: “Service required”.
  • Error E11 appears during printing.
  • Flashing lights, no printing possible.

Why Epson L3153 shows “Service required”

The L3153 uses a waste ink counter to track maintenance ink usage. Once the counter is full (100%), the printer stops all printing. Performing a L3153 Reset Epson with WicReset Connect restores full functionality. For general help you can also visit the official Epson Support website.

How to perform L3153 Reset Epson (step by step)

  1. Connect the Epson L3153 to your PC with a USB cable (Wi-Fi is not supported for reset).
  2. Open WicReset Connect on Windows.
  3. Check that your printer is detected in the program.
  4. Enter your reset key (from 6 EUR) and click Reset.
  5. Wait about 2 minutes until the process completes.
  6. Turn off the printer for 10 seconds, then turn it back on. The error should be gone.
👉 Need more details? See our full illustrated manual: WicReset Connect – Epson Manual

🔑 Get your reset key now (6 EUR)

FAQ about L3153 Reset Epson

Does L3153 Reset Epson remove Error E11?
Yes – WicReset Connect resets the counter and clears the error instantly.

Is it safe?
Absolutely. Pads are rarely full; the counter is just an estimate. Resetting is a safe, software-only fix.

How much does it cost?
A single reset key costs from 6 EUR. One key per reset.

Do I need internet access?
Only for activation of the key. The reset runs locally over USB.

Which systems are supported?
Windows 7, 8, 10, 11 – 32/64 bit. Reset via USB only.

What if the printer is not detected?
Try another USB cable or port, update drivers, then repeat the reset.

More about L3153 Reset Epson

Can I use L3153 Reset Epson on macOS?
No – the reset tool works only on Windows systems (Windows 7–11 via USB). If you use macOS or Linux, you will need access to a Windows PC to run the reset.

How long does the reset take?
The reset process usually finishes in less than 2 minutes. After restarting the printer, it is ready to print again without Error E11.

🔑 Buy WicReset Connect key (from 6 EUR)

Related Epson printers

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.