Troubleshooting Epson ME Office ME-900WD: Reset E11 ‘Ink Pad Needs Service’

Troubleshooting Epson ME Office ME-900WD: Reset E11 ‘Ink Pad Needs Service’

When your Epson ME Office ME-900WD shows Error E11 or Service required, or warns Ink Pad Needs Service, the internal waste ink counter has reached its limit. Use WicReset Connect with a reset key to clear it in about 2 minutes. Keys start from 6 EUR. Works on Windows 7–11 via USB only.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Common Symptoms – Epson ME Office ME-900WD

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson ME Office ME-900WD stops

Epson ME Office ME-900WD blocks operation at a set waste ink counter level. Resetting this software counter often solves the issue without changing pads.

Quick facts – Epson ME Office ME-900WD reset

ModelErrorSolutionOSReset time
Epson ME Office ME-900WDError E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ Download WicReset Connect

No verified official Epson driver found for Epson ME Office ME-900WD. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in many languages with narration.

Reset steps for Epson ME Office ME-900WD

  1. Connect Epson ME Office ME-900WD to your PC via USB cable.
  2. Launch WicReset Connect and ensure the printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson ME Office ME-900WD

Can I transfer the printer after reset?

Yes — reset doesn’t lock the device to a PC or account.

Do I need to register the printer?

No — not for the reset process.

Will firmware updates block reset?

WicReset works at the service counter level; keep app updated.

Can I combine reset with pad replacement?

Yes — some services replace pads and then reset the counter.

What if I sell the printer?

Provide the buyer with normal usage info; the counter will increment with use.

Tips for Epson ME Office ME-900WD reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

This page is dedicated to Epson ME Office ME-900WD reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.