Service Required on Epson PX-A620? Here’s the Fast Reset (USB, ~2 min)
A full waste ink counter causes E11 on Epson PX-A620. Reset via WicReset Connect in ~2 minutes. Keys from 6 EUR. Works on Windows 7–11 over USB.
What You’ll See on Epson PX-A620
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson PX-A620 stops
Most often, Epson PX-A620 shows Service required due to the waste ink counter. Resetting this value removes the lock and restores normal function.
Quick facts – Epson PX-A620 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson PX-A620 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson PX-A620. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson PX-A620
- Connect Epson PX-A620 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson PX-A620
What if the printer is stuck offline?
Switch USB ports, replace cable, reinstall drivers and retry.
Can I reset from a company PC?
Yes — but ensure you have admin rights and no security blocks USB.
Why key rejected?
Check typos, internet connection, and that the model is supported.
Is there a log of the reset?
WicReset can show operation status; save screenshots for support.
Do I need to disable antivirus?
Usually not; if blocked, add the app to exceptions temporarily.
Tips for Epson PX-A620 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson PX-A620 reset instructions using WicReset Connect.
What you need
- WicReset Connect key (only about €6 – the cheapest option)
- Windows PC
- USB cable
Time required
About 2 minutes
Difficulty
Very easy
Works for errors
- Epson: E10, E11, E12, E91 and similar service errors
- Canon: 1700, 5800 and similar waste ink / support code errors
- Messages like “Waste ink counter full”, “Ink pad at the end of its service life”
Supported printer series
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.
Reset Epson ink pad service
If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.
- Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
- Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
- No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.
FAQ (short)
Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.
Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

