Fix ‘Ink Pad at End of Service Life’ on Epson PX720WD – Reset Now

Fix ‘Ink Pad at End of Service Life’ on Epson PX720WD – Reset Now

Epson PX720WD locked by Ink Pad Needs Service? Reset the waste ink counter quickly using WicReset Connect. Keys from 6 EUR, Windows 7–11 via USB.

Typical Signs on Epson PX720WD

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson PX720WD stops

The device tracks waste ink usage with a waste ink counter. Once it hits its limit, Epson PX720WD blocks printing to prevent overflow. Resetting this counter restores printing. This error doesn’t always mean pads are physically saturated.

Quick facts – Epson PX720WD reset

ModelErrorSolutionOSReset time
Epson PX720WDError E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

No verified official Epson driver found for Epson PX720WD. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in many languages with narration.

Reset steps for Epson PX720WD

  1. Connect Epson PX720WD to your PC via USB cable.
  2. Launch WicReset Connect and ensure the printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.

FAQ – Epson PX720WD

Is there a model list?

Yes — check compatibility on the product page before buying the key.

Why key says “already used”?

Keys are single-use; ensure you pasted a fresh, unused code.

Can VPN/proxy block validation?

It can — use a direct connection if validation fails.

Will reset clear paper counters?

No — only the waste ink counter is affected.

Any logs to send support?

Provide screenshots of WicReset and error messages.

Tips for Epson PX720WD reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.

This page is dedicated to Epson PX720WD reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.