Solve ‘Ink Pad Needs Service’ on Epson RX585 – WicReset Guide

Solve ‘Ink Pad Needs Service’ on Epson RX585 – WicReset Guide

Trouble printing on Epson RX585? Error E11 usually means the waste ink counter is full. Clear it using WicReset Connect (USB). Reset time ~2 minutes. Keys from 6 EUR.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

What You’ll See on Epson RX585

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson RX585 stops

The service message on Epson RX585 is usually software-based: the waste ink counter. Resetting that counter clears the alert and unlocks the printer.

Quick facts – Epson RX585 reset

ModelErrorSolutionOSReset time
Epson RX585Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ Download WicReset Connect

No verified official Epson driver found for Epson RX585. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in many languages with narration.

Reset steps for Epson RX585

  1. Connect Epson RX585 to your PC via USB cable.
  2. Launch WicReset Connect and ensure the printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson RX585

What if the printer is stuck offline?

Switch USB ports, replace cable, reinstall drivers and retry.

Can I reset from a company PC?

Yes — but ensure you have admin rights and no security blocks USB.

Why key rejected?

Check typos, internet connection, and that the model is supported.

Is there a log of the reset?

WicReset can show operation status; save screenshots for support.

Do I need to disable antivirus?

Usually not; if blocked, add the app to exceptions temporarily.

Tips for Epson RX585 reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

This page is dedicated to Epson RX585 reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.