Fix Epson Ink Pad Needs Service & Canon Error 5B00
Epson EcoTank ET-2720 Locked by Waste Ink Counter? Reset & Print Again

Epson EcoTank ET-2720 Locked by Waste Ink Counter? Reset & Print Again

Epson EcoTank ET-2720 reporting Ink Pad Needs Service? Quickly reset the waste ink counter with WicReset Connect (USB). Keys start at 6 EUR. Windows 7–11.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Typical Signs on Epson EcoTank ET-2720

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson EcoTank ET-2720 stops

Most often, Epson EcoTank ET-2720 shows Service required due to the waste ink counter. Resetting this value removes the lock and restores normal function.

Quick facts – Epson EcoTank ET-2720 reset

ModelErrorSolutionOSReset time
Epson EcoTank ET-2720Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ Download WicReset Connect

No verified official Epson driver found for Epson EcoTank ET-2720. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in many languages with narration.

Reset steps for Epson EcoTank ET-2720

  1. Connect Epson EcoTank ET-2720 to your PC via USB cable.
  2. Launch WicReset Connect and ensure the printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson EcoTank ET-2720

Does WicReset show the counter %?

Yes — you can check the waste ink counter before buying a key.

Why my printer still shows error after reset?

Power it off/on. If persists, ensure the correct model and successful reset.

Can reset be done without internet?

No — online validation is required.

Do I need specific USB drivers?

Use official Windows printer drivers; avoid “unknown device”.

Can I get help if something fails?

Yes — support is available with logs/screenshots.

Tips for Epson EcoTank ET-2720 reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

This page is dedicated to Epson EcoTank ET-2720 reset instructions using WicReset Connect.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.