Fix Epson Ink Pad Needs Service & Canon Error 5B00
Service Required on Epson L559? Here’s the Fast Reset (USB, ~2 min)

Service Required on Epson L559? Here’s the Fast Reset (USB, ~2 min)

Epson L559 blocked with Error E11 / Service required? It’s usually the waste ink counter. Clear it quickly via WicReset Connect. Reset keys from 6 EUR. USB on Windows 7–11 only.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Typical Signs on Epson L559

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson L559 stops

The waste ink counter estimates ink absorbed during cleanings. When Epson L559 hits the cap, it shows a service error and locks. Resetting the counter restores output.

Quick facts – Epson L559 reset

ModelErrorSolutionOSReset time
Epson L559Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ Download WicReset Connect

No verified official Epson driver found for Epson L559. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in many languages with narration.

Reset steps for Epson L559

  1. Connect Epson L559 to your PC via USB cable.
  2. Launch WicReset Connect and ensure the printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson L559

Will reset harm the printer?

No — it’s a safe software operation.

Why do manufacturers use counters?

To prevent potential waste ink overflow and schedule maintenance.

Does reset affect network settings?

No — Wi-Fi/LAN settings remain intact.

Will the error return?

Eventually, when the counter rises again after many cleanings/prints.

Can I schedule resets earlier?

Yes — many users reset at ~95% to avoid full lock.

Tips for Epson L559 reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

This page is dedicated to Epson L559 reset instructions using WicReset Connect.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.