Fix Epson Ink Pad Needs Service & Canon Error 5B00
Epson L3289 reset – Clear Error E11 / “Service required” (USB, Windows)

Epson L3289 – Reset & Clear Error E11

Reset the waste ink counter on Epson L3289 using WicReset Connect. Works on Windows 7–11 via USB. Reset keys from 6 EUR.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Fix “Service required” on Epson L3289

If Epson L3289 displays Error E11 or "Ink pad needs service", the internal waste ink counter has reached its threshold. Resetting clears the block.

Quick facts – Epson L3289 reset

ModelErrorSolutionSupported OSReset time
Epson L3289Error E11 / Service requiredWicReset ConnectWindows 7–11 (USB)~2 min

Symptoms

  • Printer stops printing; LEDs flashing.
  • Error message “Service required” or “Error E11”.
  • Waste ink counter near or at 100 %.

Why does Epson L3289 show “Service required”?

The error comes from a software counter inside the printer. When it reaches its limit, Epson L3289 disables printing until reset. This doesn’t necessarily mean pads are physically saturated.

Download reset tool

⬇️ Download WicReset Connect

No verified driver link included — not found in official Epson search at time of writing.

Instructional Video – Epson L3289 reset

▶️ Watch WicReset Connect tutorial

ℹ️ Video is available in 10 languages with narration.

Step-by-step reset (Epson L3289)

  1. Connect Epson L3289 to your computer via USB.
  2. Open WicReset Connect and make sure it detects the printer.
  3. Enter your purchased reset key and click Reset.
  4. Wait ~2 minutes, power off for 10 seconds, then power the printer back on.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson L3289

Does reset clear Error E11?

✅ Yes, it restores printing.

Are pads physically full?

No — typically it’s just the counter.

Can reset be done via WiFi?

❌ No, only via USB.

How long does the reset last?

Until the counter is incremented by new usage.

More about Epson L3289 reset

  • Tip Reset when the counter is ~95%, avoid waiting to 100%.
  • Avoid unnecessary head cleaning cycles.
  • Always use a good quality USB cable during reset.
  • Reset keys start from 6 EUR.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

Related Epson models

This page is dedicated to Epson L3289 reset.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.