Fix Epson Ink Pad Needs Service & Canon Error 5B00
Resetting Epson L4267 Printer – Solve Waste Ink Pad Counter Error

Resetting Epson L4267 Printer – Solve Waste Ink Pad Counter Error

If your Epson L4267 shows Error E11, Service required, or the message Ink Pad Needs Service, the waste ink counter has reached its limit. By using WicReset Connect with a reset key, you can clear the error and resume printing in less than 2 minutes. Keys start from 6 EUR. Works on Windows 7–11 via USB only.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Symptoms of Epson L4267 error

  • Printer refuses to print, LEDs are blinking.
  • Message: Error E11 or “Service required”.
  • Warning: Ink Pad Needs Service.

Why Epson L4267 blocks printing

The printer uses a software-based waste ink counter to track absorbed ink during cleanings. When this counter reaches its limit, Epson L4267 stops printing. Resetting the counter with WicReset Connect restores full functionality.

Quick facts – Epson L4267 reset

ModelErrorSolutionOSReset time
Epson L4267Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ WicReset Connect

No verified official Epson driver found for L4267 yet. For installation, use Epson Setup Navi.

Video tutorial

▶ Watch WicReset tutorial

Available in 10 languages with narration.

Reset steps for Epson L4267

  1. Connect Epson L4267 to your PC with a USB cable.
  2. Run WicReset Connect and check printer detection.
  3. Buy a reset key, enter it, and click Reset.
  4. Wait ~2 minutes, then restart the printer.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson L4267

Does reset remove Epson L4267 Error E11?

✅ Yes. Resetting the waste ink counter clears the error and restores printing.

Are pads physically full?

Not always – the error is based on a counter, not necessarily on actual saturation.

Can I reset via Wi-Fi?

No, reset works only via USB.

Which systems are supported?

Windows 7, 8, 10, 11.

Tips for Epson L4267 owners

  • Perform reset around 95% usage to avoid sudden lockout.
  • Limit unnecessary cleaning cycles to slow down counter growth.
  • Always use a reliable USB cable.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

Related Epson models

This page is dedicated to Epson L4267 reset instructions with WicReset Connect.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.