How to Confirm Canon Service Mode Before Using a Reset Key
Use this detailed guide for service-mode verification and safe key timing. It explains which printers belong to the group, how to count the presses correctly and how to confirm service mode before entering a Wic Reset Connect activation key.
Service-Mode Verification And Safe Key Timing
The activation key should never be the tool used to test whether service mode worked. Detection and indicator checks come first.
The activation key should never be the tool used to test whether service mode worked. Detection and indicator checks come first.
The number of STOP, RESET, Cancel or touchscreen presses is not a decorative detail. It selects a printer mode. The correct sequence must be completed before Wic Reset Connect can access the supported waste-ink counter.
The activation key is entered only after the printer stays visible in Wic Reset Connect.
Service-mode verification and safe key timing is the defining sequence for this page.
The button method comes from the official source; stable detection is the operational check before the protected reset.
Service-mode detection and the protected reset should not use Wi-Fi or a hub.
Printers covered by this service-mode profile
Use the complete printer label, not only the first family letters. Regional suffixes and touchscreen layouts can change the correct controls.
Source note: The button method comes from the official source; stable detection is the operational check before the protected reset.
Check Wic Reset Connect supportComplete the service-mode sequence slowly
Keep POWER held through the press count. Pause briefly after the final press so the printer can register the selected mode.
Step 1
Complete the exact button sequence.
Step 2
Wait for Windows to enumerate the printer.
Step 3
Check that the power light is stable.
Step 4
Confirm no alternating green and orange error remains.
Step 5
Open Wic Reset Connect.
Step 6
Paste the key only after the model stays detected.
Service mode is used for a supported counter reset
Use the workflow for supported waste-ink messages such as 1700, 5B00, 5B01 or 5B02. Cartridge, print-head, scanner, paper-feed and mechanical errors need separate diagnosis.
A nearby model can use a different number of presses.
HOME, Resume or Cancel may be an invisible screen area during startup.
Never use an activation key to test whether service mode worked.
Software cannot stop a real ink leak or repair a saturated part.
Why the printer does not enter the expected mode
Most failed attempts come from a wrong count, an early POWER release, a misidentified touchscreen area or unstable USB detection.
Pasting the key while the printer reconnects
Stop, power the printer off completely and repeat the exact documented sequence. Confirm stable USB detection before continuing.
Ignoring an orange error light
Stop, power the printer off completely and repeat the exact documented sequence. Confirm stable USB detection before continuing.
Using a hub
Stop, power the printer off completely and repeat the exact documented sequence. Confirm stable USB detection before continuing.
Leaving another Canon printer connected
Stop, power the printer off completely and repeat the exact documented sequence. Confirm stable USB detection before continuing.
Service mode first, Wic Reset Connect second
After the printer enters the correct mode, connect it directly to Windows, select the detected model in Wic Reset Connect and paste one purchased activation key. Keep POWER and USB stable until the final program message.
Use the key only after stable service-mode detection
Windows should keep the Canon device visible and the power indicator should remain stable. Alternating green and orange lights normally point to another active error or an incorrect mode.
How to Confirm Canon Service Mode Before Using a Reset Key FAQ
Which Canon printers use service-mode verification and safe key timing?
This page covers all supported Canon models. Always compare the complete model with the current service-mode table before pressing buttons.
Коли слід підключити USB-кабель?
Перед запуском програми Wic Reset Connect скористайтеся прямим підключенням для передачі даних і дочекайтеся, поки Windows виявить сервісний пристрій.
Чи відбувається в сервісному режимі автоматичне скидання лічильника відходів?
Ні. Режим обслуговування служить лише для підготовки принтера до роботи. Скидання лічильника підтримуваних показників здійснюється за допомогою програми Wic Reset Connect та одного ключа активації.
Як дізнатися, чи було зареєстровано кількість натискань?
Принтер повинен припинити звичайне завантаження, залишатися виявленим системою Windows і відображати очікуваний стабільний індикатор, а не почергові повідомлення про помилки.
Чи можу я повторити послідовність натискання кнопок?
Так, але спочатку повністю вимкніть принтер і зачекайте кілька секунд. Не повторюйте цю дію, поки принтер перебуває в іншому режимі.
Чи можна скористатися Wi-Fi?
Ні. Для виявлення режиму обслуговування та захищеного перезавантаження використовуйте пряме підключення через USB.
What if the printer has a touchscreen?
Use the documented screen area that corresponds to HOME, Resume or Cancel. A dark display can still have an active touch area.
Why should I not guess between five and six presses?
The count selects a mode. The wrong count can start another maintenance function or leave the printer unavailable to Connect.
What errors are normally related to the reset?
Supported Canon waste-ink warnings include 1700, 5B00, 5B01 and 5B02. Other faults must be diagnosed separately.
Does the software repair a full absorber?
No. It changes the supported electronic counter. A saturated or leaking absorber still needs physical service.
Does an unused key expire while I prepare service mode?
No. An unused key has no expiry date before use.
Where is the current Canon service-mode reference?
Use the official page at https://wicresetconnect.com/en/canon-service-mode/ and confirm the exact model group.
Confirm the method, connect by USB and reset once
Use the official service-mode table, verify stable detection and then complete the supported waste-counter reset with Wic Reset Connect and one activation key.
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська