Fix Epson Ink Pad Needs Service & Canon Error 5B00
Epson Printer Reset Guide

Epson L355 Reset – Fix Service Required, Error E11 and Waste Ink Counter Problems

Last updated: April 21, 2026

If your Epson L355 has stopped printing and shows Service Required, Error E11, or a message saying that parts inside the printer are at the end of their service life, the fix is to reset the waste ink counter using WicReset Connect.

This page is built for users who need a fast Epson L355 reset, clear steps, and a direct path to restore printing.

Quick answer

The printer is blocked by the internal counter, not by a normal cartridge issue.

The fix is to reset the waste ink counter using WicReset Connect.

Before you start

  • Use a Windows computer
  • Connect the printer by USB
  • Make sure the printer is detected correctly
  • Use a valid WicReset Connect key

Why Epson L355 shows Service Required

The Epson L355 waste ink counter reset becomes necessary when the printer reaches its internal service limit. The printer records cleaning activity and maintenance cycles, and after enough use the counter can block printing.

This is why people search for Epson L355 reset, Epson L355 Service Required, Epson L355 Error E11, Epson L355 waste ink pad reset, and how to reset Epson L355.

Directly from the software developer

WicReset Connect is our software. That means you are buying the reset solution directly from the software developer, not from an unknown third-party source.

For users searching for a trusted Epson L355 printer reset, this can increase confidence and make the buying decision easier.

How to reset Epson L355

  1. Buy a valid WicReset Connect key.
  2. Connect the Epson L355 directly to a Windows PC using USB.
  3. Run WicReset Connect and select your printer.
  4. Enter the key and start the Epson L355 waste ink counter reset.
  5. Wait for the procedure to finish correctly.
  6. Restart the printer and check printing again.

Common Epson L355 search intent

  • Epson L355 reset
  • Epson L355 Service Required fix
  • Epson L355 Error E11 fix
  • Epson L355 waste ink counter reset
  • Epson L355 ink pad reset
  • how to reset Epson L355

Why this solution is a strong fit

  • Targets the actual counter lock
  • Built for Service Required intent
  • Matches Error E11 searches
  • Simple reset flow
  • Direct from the software developer

Need Epson L355 reset now?

If your Epson L355 is blocked and you want the fastest path back to printing, use WicReset Connect to remove the waste ink counter lock and restore printing.

Why users keep searching for this fix

A blocked Epson printer creates urgent search intent. Users usually want the exact model, the exact error, and the exact solution right away.

That is why strong phrases like Epson L355 reset, fix Epson L355 Error E11, and Epson L355 Service Required fix matter so much.

FAQ – Epson L355 Reset

Why does Epson L355 show Service Required?

In many cases, this message appears because the internal waste ink counter has reached its limit and the printer has been blocked.

How do I fix Epson L355 Error E11?

If the issue is caused by the waste ink counter lock, the fix is to reset the waste ink counter using WicReset Connect.

What does Epson L355 waste ink counter reset mean?

It means removing the internal service lock that blocks printing after the counter reaches its limit.

Can I reset Epson L355 at home?

Yes. If the printer communicates correctly with your Windows computer through USB, the reset can be done at home.

Do I need Wi-Fi to reset Epson L355?

No. A Windows computer and USB connection are recommended.

Why does buying directly from the software developer matter?

It increases trust and gives users a more direct solution path, because WicReset Connect is our software and the reset solution comes directly from the developer.

Will Epson L355 print normally again after the reset?

If the printer was blocked by the waste ink counter, it should return to normal printing after a successful reset.

Fix Epson L355 fast and get back to printing

Use WicReset Connect to fix Service Required, Error E11, and waste ink counter lock problems on Epson L355.

Get Reset Key Now

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Tags: , , , , , , , , ,