Epson-Tintenkissen muss gewartet werden & Canon-Fehler 5B00 beheben
Epson Printer Reset Guide

Epson L355 Reset – Fix Service Required, Error E11 and Waste Ink Counter Problems

Last updated: April 21, 2026

If your Epson L355 has stopped printing and shows Service Required, Fehler E11, or a message saying that parts inside the printer are at the end of their service life, the fix is to reset the Restfarbenzähler mit WicReset Verbinden.

This page is built for users who need a fast Epson L355 reset, clear steps, and a direct path to restore printing.

Quick answer

The printer is blocked by the internal counter, not by a normal cartridge issue.

The fix is to reset the waste ink counter using WicReset Connect.

Before you start

  • Use a Windows computer
  • Connect the printer by USB
  • Make sure the printer is detected correctly
  • Use a valid WicReset Connect key

Why Epson L355 shows Service Required

Die Epson L355 waste ink counter reset becomes necessary when the printer reaches its internal service limit. The printer records cleaning activity and maintenance cycles, and after enough use the counter can block printing.

This is why people search for Epson L355 reset, Epson L355 Service Required, Epson L355 Error E11, Epson L355 waste ink pad reset, und how to reset Epson L355.

Directly from the software developer

WicReset Connect is our software. That means you are buying the reset solution directly from the software developer, not from an unknown third-party source.

For users searching for a trusted Epson L355 printer reset, this can increase confidence and make the buying decision easier.

How to reset Epson L355

  1. Buy a valid WicReset Verbinden key.
  2. Connect the Epson L355 directly to a Windows PC using USB.
  3. ausführen. WicReset Verbinden and select your printer.
  4. Enter the key and start the Epson L355 waste ink counter reset.
  5. Wait for the procedure to finish correctly.
  6. Restart the printer and check printing again.

Common Epson L355 search intent

  • Epson L355 reset
  • Epson L355 Service Required fix
  • Epson L355 Error E11 fix
  • Epson L355 waste ink counter reset
  • Epson L355 ink pad reset
  • how to reset Epson L355

Why this solution is a strong fit

  • Targets the actual counter lock
  • Built for Service Required intent
  • Matches Error E11 searches
  • Simple reset flow
  • Direct from the software developer

Need Epson L355 reset now?

If your Epson L355 is blocked and you want the fastest path back to printing, use WicReset Verbinden to remove the waste ink counter lock and restore printing.

Why users keep searching for this fix

A blocked Epson printer creates urgent search intent. Users usually want the exact model, the exact error, and the exact solution right away.

That is why strong phrases like Epson L355 reset, fix Epson L355 Error E11, und Epson L355 Service Required fix matter so much.

FAQ – Epson L355 Reset

Why does Epson L355 show Service Required?

In many cases, this message appears because the internal waste ink counter has reached its limit and the printer has been blocked.

How do I fix Epson L355 Error E11?

If the issue is caused by the waste ink counter lock, the fix is to reset the waste ink counter using WicReset Verbinden.

What does Epson L355 waste ink counter reset mean?

It means removing the internal service lock that blocks printing after the counter reaches its limit.

Can I reset Epson L355 at home?

Yes. If the printer communicates correctly with your Windows computer through USB, the reset can be done at home.

Do I need Wi-Fi to reset Epson L355?

No. A Windows computer und USB connection are recommended.

Why does buying directly from the software developer matter?

It increases trust and gives users a more direct solution path, because WicReset Connect is our software and the reset solution comes directly from the developer.

Will Epson L355 print normally again after the reset?

If the printer was blocked by the waste ink counter, it should return to normal printing after a successful reset.

Fix Epson L355 fast and get back to printing

Use WicReset Verbinden to fix Service Required, Fehler E11, und Restfarbenzähler lock problems on Epson L355.

Get Reset Key Now

Was Sie brauchen

  • WicReset Connect-Taste (nur etwa 6 € - die billigste Option)
  • Windows-PC
  • USB-Kabel

Erforderliche Zeit

Etwa 2 Minuten

Schwierigkeitsgrad

Sehr leicht

Funktioniert bei Fehlern

  • Epson: E10, E11, E12, E91 und ähnliche Servicefehler
  • Kanone: 1700, 5800 und ähnliche Tintenabfälle / Supportcode-Fehler
  • Meldungen wie “Abfalltintenzähler voll”, “Tintenkissen am Ende seiner Lebensdauer”

Unterstützte Druckerserien

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-Serie, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF und viele andere beliebte Serien.


Epson Tintenkissen Service zurücksetzen

Wenn Ihr Epson Meldungen anzeigt wie “Das Stempelkissen ist am Ende seiner Lebensdauer”, “Stempelkissen-Service erforderlich” oder “Abfall-Farbkissen voll”, können Sie den Epson-Tintenkissen-Service zurücksetzen mit einem WicReset Connect Schlüssel. Das Programm setzt den internen Tintenverbrauchszähler zurück, so dass der Drucker wieder funktioniert, ohne dass ein Service-Center aufgesucht werden muss.

  • Behebt die Warnungen “Epson Tintenkissen-Service” / “Service erforderlich” in wenigen Minuten.
  • Arbeitet als Epson Tintenkissen Service zurücksetzen Lösung für die meisten EcoTank-, L-Serien-, ET-Serien-, XP-, WF- und Stylus-Drucker.
  • Kein Hardware-Resetter erforderlich - nur ein Windows-PC, ein USB-Kabel und WicReset Connect.

FAQ (kurz)

F: Muss ich das physische Stempelkissen ersetzen?
A: In den meisten Fällen zu Hause und im Büro setzen Sie mit WicReset Connect nur den Zähler für verbrauchte Tinte zurück und verwenden den Drucker normal weiter.

F: Ist dies eine einmalige Rückstellung?
A: Jede Taste setzt den Zähler einmal zurück. Sie können den Vorgang in Zukunft mit einer anderen Taste wiederholen, wenn die Meldung erneut erscheint.