Epson XP-305 Reset: USB and Network Connection Checks
Printing successfully does not by itself confirm reset communication. Check the connection and the detected profile in WICRESETPRO. If network detection fails, try a stable direct USB data connection. Wi-Fi/LAN remains available where the printer hardware and network setup support it.
Normal wireless printing and protected reset communication are different
Select the exact XP-305 detected in WICRESETPRO and read its counters through the chosen connection. If network communication is unavailable, check the network setup or try direct USB.
Normal wireless printing and protected reset communication are different
Select the exact XP-305 detected in WICRESETPRO and read its counters through the chosen connection. If network communication is unavailable, check the network setup or try direct USB.
If network detection fails, try a stable direct USB data connection. Wi-Fi/LAN remains available where the printer hardware and network setup support it.
Use the model-specific diagnostic guidance on this page.
Prepare the correct driver, direct USB path and printer condition before the activation key is used.
Eligible interrupted attempts have a documented recovery route after the technical cause is corrected.
Use diagnosis, a free USB test and final verification
The activation key should be the last preparation item used, not the first troubleshooting step.
Diagnose the exact problem
Select the exact XP-305 detected in WICRESETPRO and read its counters through the chosen connection. If network communication is unavailable, check the network setup or try direct USB.
Prove the connection
For Epson XP-305, use WICRESETPRO on Windows 10/11 x64, macOS 14+ (Intel or Apple Silicon) or Android. Counter reading and reset work over USB, or Wi-Fi/LAN where the printer hardware and network setup support it. Prepare the printer and inspect the absorber before the operation.
Reset and document the result
Complete the protected write, restart the Epson XP-305 as requested by the procedure and verify the result.
When troubleshooting USB, select the USB-connected XP-305 rather than a different printer or its network queue. Keep the unused key until the Epson XP-305 remains steadily detected and the free reading succeeds.
Get the Epson XP-305 keyEpson XP-305 Reset: USB and Network Connection Checks
For Epson XP-305, use WICRESETPRO on Windows 10/11 x64, macOS 14+ (Intel or Apple Silicon) or Android. Counter reading and reset work over USB, or Wi-Fi/LAN where the printer hardware and network setup support it. Prepare the printer and inspect the absorber before the operation.
The Epson XP-305 stores an estimated maintenance value in printer memory.
The absorber or waste path can require service independently of the electronic counter.
Use the complete Epson XP-305 name shown by Windows and WICRESETPRO.
A counter reset does not repair cartridges, scanners, paper feed, carriages or print heads.
Complete the protected counter operation safely
If network detection fails, try a stable direct USB data connection. Wi-Fi/LAN remains available where the printer hardware and network setup support it. Follow the sequence below and stop if printer detection becomes unstable.
Record the original condition
Before restarting the Epson XP-305, note the message, indicator lights and current connection. When troubleshooting USB, select the USB-connected XP-305 rather than a different printer or its network queue.
Prepare a supported device
Clear the print queue, close Epson Status Monitor and disconnect other printers. Install the original Epson driver if the device name is incomplete.
Use a direct USB data path
Connect the Epson XP-305 directly to a motherboard USB port. Wi-Fi/LAN is available where the printer hardware and setup support it. For a USB connection, avoid unreliable hubs, splitters and docks.
Read the counter without using the key
Open WICRESETPRO, select the Epson XP-305 and read the current waste ink value. Continue only when the model remains detected.
Reset with WICRESETPRO
Open the current WICRESETPRO version, select the detected printer, paste the complete activation key and keep USB and power connected.
Restart and verify
After the success message, switch the printer off as requested by the procedure, turn it on and read the counter again to confirm the result.
Follow the counter-reset steps
The instructions cover the direct USB workflow, counter reading, key entry, requested restart and final verification. Use this page for the model-specific diagnostic question: Epson XP-305 reset USB.
Read and reset supported counters in WICRESETPRO.
Download WICRESETPRO to read supported counters. A valid Pro key is required for a supported full reset.
WICRESETPRO
Use WICRESETPRO to identify the Epson XP-305, read the current waste ink values and prove that the direct USB connection is stable.
Download WICRESETPROWICRESETPRO
Use WICRESETPRO for the protected counter write only after the Epson XP-305 has passed the free readiness test.
Download WICRESETPROFocused Epson XP-305 help from the software producer
If network detection fails, try a stable direct USB data connection. Wi-Fi/LAN remains available where the printer hardware and network setup support it. Assistance is available for printer detection, direct USB, original drivers, Epson background processes and interrupted attempts.
An unused Pro key has no expiry date. The first reset starts a 24-hour period for repeat resets on that same physical printer only. It does not allow unlimited resets on different printers.
Epson XP-305 Reset: USB and Network Connection Checks: common complications
Select the exact XP-305 detected in WICRESETPRO and read its counters through the chosen connection. If network communication is unavailable, check the network setup or try direct USB.
Only the network copy appears
For the USB checks on this page, install any required Epson driver and select the USB-connected XP-305. For network use, verify that WICRESETPRO detects the printer on a reachable network.
USB is connected but the wrong printer is selected
Before starting a reset, identify the USB device that disappears when its cable is disconnected and reappears when reconnected. Never disconnect the cable during the reset.
The printer is not detected
Use another direct motherboard USB port, a different data cable and the original Epson XP-305 driver.
The counter cannot be read
Clear pending jobs, close Status Monitor and terminate Epson processes from the WICRESETPRO Support menu.
The reset was interrupted
Correct the connection or preparation problem before retrying. If the result is unclear, contact support with the exact printer model, error message and order number. An unused Pro key has no expiry date. The first reset starts a 24-hour period for repeat resets on that same physical printer only. It does not allow unlimited resets on different printers.
Waste ink is visible
Stop using the printer and service the physical absorber, tubes or affected parts.
The direct USB device remains detected through reading, reset and final verification.
After WICRESETPRO reports completion, switch the Epson XP-305 off as requested by the procedure and turn it on again. Read the counter once more in WICRESETPRO.
When troubleshooting USB, select the USB-connected XP-305 rather than a different printer or its network queue. Another error after a confirmed 0% reading must be diagnosed separately.
Epson XP-305 Reset: USB and Network Connection Checks
Printing successfully does not by itself confirm reset communication. Check the connection and the detected profile in WICRESETPRO. When troubleshooting USB, select the USB-connected XP-305 rather than a different printer or its network queue.
Prepare Epson XP-305
Install WICRESETPRO for Windows 10/11 x64, macOS 14+ (Intel or Apple Silicon) or Android. All three versions support basic Epson waste ink counter reading and reset.
WICRESETPRO · Windows 7 / 8 / 8.1
Read and reset supported Epson waste ink counters through USB, or Wi-Fi when the printer and your setup provide a network connection. Additional service tools have their own platform and connection requirements.
Windows 10/11 x64 · macOS 14+ · Android · USB · Wi-Fi where available on the printer
Windows 10/11 x64 · macOS 14+ · Android · USB · Wi-Fi where available on the printer
Keep internet access available for model data and operation approval. Clear pending print jobs and keep the printer’s power and data connection stable. Available in 60 interface languages.
Download WICRESETPRO
Windows
Windows 10 / 11 · x64Download for free · Windows ↓WICRESETPRO · Windows 7 / 8 / 8.1
Coming soonWindows 7 / 8 / 8.1macOS
macOS 14+ · Intel & Apple SiliconAndroid
AndroidDownload for free · Android ↓
Epson — Instructions
Read counters
Select your printer and read the waste ink counters. Wait for the percentages to appear.
Instructions
Open WICRESETPRO. Connect your Epson printer by USB or Wi-Fi and select the correct model.
Read counters
Select your printer and read the waste ink counters. Wait for the percentages to appear.
Reset key
Copy your complete 12-character key from the TXT attachment and paste it into the program's key field.
Reset
Click Reset. Wait for the success message and 0% readings. Do not turn off the printer or disconnect USB during the reset.
Restart
After a successful reset, turn the printer off using its power button. Wait 10 seconds, then turn it on again.
Need help?
Include your order number, printer model and error message. Attach a screenshot.
A1B2C3D4E5F6 is an inactive example. Use your own key.
Read, reset and verify Epson XP-305
- Use the connection offered for your printer and operation. Select the exact model detected in WICRESETPRO.
- Read the available waste ink counters in WICRESETPRO and wait for a completed result. A missing reading is not a zero reading.
- Waste ink counter reset is supported for this model. Select that operation and follow its preparation instructions in the app.
- For a supported full reset, enter your valid Pro reset key and start the operation. Keep the connection stable until the app reports the result.
- Restart only when instructed, then read the counters again in Pro to verify the outcome.
Once a supported printer is connected and ready, the reset itself can take about a minute. Installation and preparation can take longer.
Resetting a counter does not replace physical absorber maintenance.
Your reset key
Unused keys do not expire. After the first reset, you can reuse the key on the same printer for 24 hours. Unused units in a Multi-Key pool do not all expire when that printer’s reuse period ends.
Choose one Multi-Key with the purchased pool or the corresponding number of separate codes. Check the current product, price and currency in the store.
For the wider application feature set, see printer diagnostics and maintenance in WICRESETPRO. Functions shown there are model-dependent.
Questions and answers
How do I reset the Epson XP-305 waste ink counter?
Connect the Epson XP-305 to WICRESETPRO on Windows 10/11 x64, macOS 14+ (Intel or Apple Silicon), or Android through USB, or Wi-Fi/LAN where the printer hardware and network setup support it, read the counter, enter one activation key in WICRESETPRO and complete the guided reset.
Can the Epson XP-305 be reset over Wi-Fi?
Epson counter reading and reset are available on Windows 10/11 x64, macOS 14+ (Intel or Apple Silicon) and Android, over USB, or Wi-Fi/LAN where the printer hardware and network setup support it. Additional service functions have their own requirements.
Does an unused WICRESETPRO key expire?
Unused keys have no expiry date. After the first reset, the key can be reused on the same printer for 24 hours. Unused Multi-Key units remain available.
How is a successful reset verified?
Wait for the completed result in WICRESETPRO, follow any requested restart and perform the control reading in Pro. Keep the before-and-after readings. A missing reading is not a zero, and a remaining error needs its own diagnosis.
Why can the printer print over Wi-Fi but not reset?
Epson counter reading and reset are available on Windows 10/11 x64, macOS 14+ (Intel or Apple Silicon) and Android, over USB, or Wi-Fi/LAN where the printer hardware and network setup support it. Additional service functions have their own requirements.
Can I reconnect Wi-Fi after the reset?
Epson counter reading and reset are available on Windows 10/11 x64, macOS 14+ (Intel or Apple Silicon) and Android, over USB, or Wi-Fi/LAN where the printer hardware and network setup support it. Additional service functions have their own requirements.
Is the reset software free to download?
The free Epson trial sets eligible waste ink counters to 80%. At least one supported counter must be above 95%, and server approval is required. Use a valid reset key for a full reset to zero.
Does one key reset several printers?
Unused keys do not expire. After the first reset, reuse is available on the same printer for 24 hours. Another printer needs another key or an unused Multi-Key unit; the unused pool does not expire with one printer’s access period.
What if waste ink is visible?
Stop using the printer and service the physical waste system before normal operation.
Is support available after purchase?
Yes. Assistance is available for USB, driver, detection, process and interrupted-reset problems.
Can a reset repair the print head?
No. The software changes the supported waste ink counter only.
A LITTLE HELP. BACK TO PRINTING.
Need help? We’re here 24/7.
Contact our team by email or WhatsApp. Please include your order number and printer model so we can help you quickly.
Just exploring? You’re welcome to ask before ordering.