Epson EcoTank ET-2813 E11 Error Solution – USB Reset with WicReset Connect
Printer Epson EcoTank ET-2813 stopped with E11? Reset the waste ink counter using WicReset Connect (Windows 7–11, USB). Done in minutes. Keys from 6 EUR.
What You’ll See on Epson EcoTank ET-2813
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson EcoTank ET-2813 stops
Epson EcoTank ET-2813 stops to protect against possible overflow when the waste ink counter is high. A reset lifts the lock and printing resumes. The message can appear before pads are physically saturated.
Quick facts – Epson EcoTank ET-2813 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson EcoTank ET-2813 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson EcoTank ET-2813. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson EcoTank ET-2813
- Connect Epson EcoTank ET-2813 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson EcoTank ET-2813
What exactly does the reset do?
It clears the waste ink counter value to unlock printing.
Is WicReset Connect paid?
The app is free; only the reset key is paid.
Can one key fail?
Rarely; if key fails due to counter already clear, verify model/support.
Will I get a receipt/invoice?
Yes — the shop issues documentation for purchases.
Can the reset be undone?
The counter starts from 0% and increases with use; you can reset again later.
Tips for Epson EcoTank ET-2813 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson EcoTank ET-2813 reset instructions using WicReset Connect.