Epson EcoTank ET-2810 Reset – Fix Service Required / Error E11

If your Epson EcoTank ET-2810 printer stopped printing and now shows Požadovaná služba, Chyba E11, or a message about the ink pad reaching the end of its service life, the most common solution is to reset the počítadlo odpadního inkoustu s WicReset Connect.

Compatible printers

This page is built mainly for Epson EcoTank ET-2810 reset, but the same reset method also applies to:

Why Epson ET-2810 stops printing

Na stránkách Epson EcoTank ET-2810 keeps track of maintenance cleaning cycles. During normal use, some ink goes into the internal waste ink system. After enough cleanings, the printer reaches the limit of the internal počítadlo odpadního inkoustu and blocks printing until the counter is reset.

This is why users search for terms like: Epson ET-2810 reset, Epson ET-2810 waste ink counter reset, Epson ET-2810 Service Required, Epson ET-2810 Error E11, Epson ET-2810 ink pad reset, and how to reset Epson ET-2810.

How to reset Epson EcoTank ET-2810

The reset is usually quick if the printer is connected correctly and the issue is related to the maintenance counter.

1. Install WicReset Connect on a Windows computer.
2. Connect the printer directly with a Kabel USB.
3. Open the program and confirm the printer is detected.
4. Enter a valid resetovací klávesa.
5. Run the waste ink counter reset.
6. Wait until the reset is complete.
7. Restart the printer.

After a successful reset, the printer should return to normal printing if the problem was caused by the waste ink counter lock.

This page also helps for these models

Besides ET-2810, this page is also relevant if you searched for: ET-2811 reset, ET-2812 reset, ET-2813 Service Required, ET-2814 Error E11, ET-2815 waste ink counter reset, ET-2816 ink pad reset, and ET-2818 printer reset.

Many of these models share the same type of maintenance counter problem, so users often face the same blocked printing issue.

Useful internal links

• Buy WicReset Connect key
• Check supported printer models
• WicReset Connect Epson manual
• Video instructions

Need Epson ET-2810 reset now?

Use WicReset Connect to reset the waste ink counter and fix Požadovaná služba, Chyba E11 and ink pad related warnings for ET-2810, ET-2811, ET-2812, ET-2813, ET-2814, ET-2815, ET-2816 and ET-2818.

FAQ – Epson ET-2810 reset

What does Epson ET-2810 Service Required mean?

It usually means the internal počítadlo odpadního inkoustu has reached its limit and the printer needs a reset.

How do I fix Epson ET-2810 Error E11?

The usual fix is to perform an Epson ET-2810 waste ink counter reset pomocí WicReset Connect.

Does this also work for ET-2811, ET-2812, ET-2813, ET-2814, ET-2815, ET-2816 and ET-2818?

Yes. This page also covers those compatible EcoTank models.

Can I reset Epson ET-2810 at home?

Yes. Most users can do it at home with a Windows computer, USB cable and WicReset Connect.

Does reset solve all printer problems?

No. It solves waste ink counter related problems. Other hardware faults need separate diagnosis.