Epson L3161 Reset – Fix Service Required / Error E11 in Minutes
If your Epson L3161 shows Chyba E11 nebo Požadovaná služba, the printer has locked itself due to the počítadlo odpadního inkoustu. Restore printing fast with WicReset Connect. Works on Windows 7–11 via USB. Reset key price starts from 6 EUR.
🔑 Koupit klíč WicReset Connect (od 6 EUR)
Na stránkách Epson L3161 is part of Epson’s EcoTank series. Like other models, it stops working when the waste ink counter reaches 100%. This is not a hardware failure — it’s a software lock. Resetting with WicReset Connect clears the error and restores full functionality.
Stáhnout WicReset Connect
Symptoms on Epson L3161
- Zpráva na obrazovce: “Požadovaná služba”.
- Chyba E11 interrupts all printing.
- Flashing lights, printer refuses to print.
Proč se tato chyba zobrazuje
The L3161 uses a počítadlo odpadního inkoustu to track maintenance. Once it reaches 100%, the printer locks itself. Resetting the counter with WicReset Connect clears Error E11 and restores printing.
How to reset Epson L3161 step by step
- Stáhnout WicReset Connect and install it.
- Connect Epson L3161 to your PC with a Kabel USB (reset not possible via Wi-Fi).
- Run the program and check if the printer is detected.
- Zadejte zakoupený resetovací klávesa (from 6 EUR) and click Obnovení.
- Wait about 2 minutes for the reset to finish.
- Restart the printer (turn off for 10s, then turn back on). The error should disappear.
🔑 Get your reset key now (6 EUR)
FAQ – Epson L3161 Reset
Does WicReset Connect support Epson L3161?
Yes – the program fully supports Epson L3161 on Windows 7–11 via USB.
Will I need to replace pads?
Usually not. The error is triggered by the counter, not the pads themselves.
How much does it cost?
A reset key starts from 6 EUR. One key = one reset.
🔑 Koupit klíč WicReset Connect (od 6 EUR)
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська