Reset Epson L3203 – Fix Waste Ink Counter / Error E11
Simple and safe reset with WicReset Connect. Compatible with Windows 7–11 (USB only).
Epson L3203 may stop printing and show Chyba E11 nebo “Service required”. This means the počítadlo odpadního inkoustu reached its limit. The pads inside are usually not physically full — the printer is just locked by software. You can clear the error and get back to printing using WicReset Connect.
Symptoms when Epson L3203 is locked
- Zpráva “Service required” on screen.
- Error E11 shown during printing.
- Printer lights flashing and printing blocked.
Why this happens on L3203
The printer counts estimated waste ink usage with an internal počítadlo odpadního inkoustu. At 100% the printer stops working. Resetting this counter with WicReset Connect restores full functionality.
How to reset Epson L3203 step by step
- Download WicReset Connect.
- Connect Epson L3203 to your PC via Kabel USB (Wi-Fi reset is not supported).
- Launch the program and enter your resetovací klávesa.
- Click RESET and wait ~2 minutes.
- Turn the printer OFF for 10 seconds, then power it ON again.
👉 Ready to unlock your printer? Buy WicReset Connect key now
FAQ – Epson L3203 Waste Ink Counter Reset
Will this remove Error E11?
✅ Yes, the reset clears the counter and removes the error.
Are the ink pads full?
❌ Usually not. The counter is just an estimate.
Does it work via Wi-Fi?
❌ No, reset requires USB connection.
Které systémy jsou podporovány?
Windows 7, 8, 10, 11.
Tips for Epson L3203 users
- Don’t wait for 100% — reset when counter is at 95%.
- Avoid too many head cleanings (they increase waste ink).
- Always use a stable USB cable during reset.
English 
Čeština 
Deutsch 
Ελληνικά 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська