Reset Epson L3203 – Fix Waste Ink Counter / Error E11
Simple and safe reset with WicReset Conectar. Compatible with Windows 7–11 (USB only).
Epson L3203 may stop printing and show Error E11 o “Service required”. This means the contador de tinta usada reached its limit. The pads inside are usually not physically full — the printer is just locked by software. You can clear the error and get back to printing using WicReset Conectar.
Symptoms when Epson L3203 is locked
- Message “Service required” on screen.
- Error E11 shown during printing.
- Printer lights flashing and printing blocked.
Why this happens on L3203
The printer counts estimated waste ink usage with an internal contador de tinta usada. At 100% the printer stops working. Resetting this counter with WicReset Conectar restores full functionality.
How to reset Epson L3203 step by step
- Download WicReset Conectar.
- Connect Epson L3203 to your PC via Cable USB (Wi-Fi reset is not supported).
- Launch the program and enter your tecla reset.
- Haga clic en RESET and wait ~2 minutes.
- Turn the printer OFF for 10 seconds, then power it ON again.
👉 Ready to unlock your printer? Buy WicReset Connect key now
FAQ – Epson L3203 Waste Ink Counter Reset
Will this remove Error E11?
✅ Yes, the reset clears the counter and removes the error.
Are the ink pads full?
❌ Usually not. The counter is just an estimate.
Does it work via Wi-Fi?
❌ No, reset requires USB connection.
Which systems are supported?
Windows 7, 8, 10, 11.
Tips for Epson L3203 users
- Don’t wait for 100% — reset when counter is at 95%.
- Avoid too many head cleanings (they increase waste ink).
- Always use a stable USB cable during reset.
English 
Čeština 
Deutsch 
Ελληνικά 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська