wic reset

PROGRAM 
WIC RESET CONNECT

is used to reset the counter of the absorber, the used ink container, which is found in Canon printers.

Canon printers track the number of head cleanings and pages printed. Based on this data, they estimate how full the waste ink container is, which often isn’t actually completely full. In such cases, the Wic Reset Connect program offers an excellent solution, allowing you to easily reset the printer’s counter and continue using it. Eventually, the container will physically need replacement once it’s truly full. However, until that point, you can avoid costly servicing by simply resetting the counter.

DOWNLOAD WIC RESET CONNECT

VIEW THE INSTRUCTIONS BEFORE PERFORMING A RESET !!!

We have prepared a professional video tutorial for you, featuring an instructor who demonstrates step-by-step how to reset the absorber counter. With this guide, you can effortlessly reset your printer’s counter. You’ll also learn how to address the most common issues. Should you need it, our immediate, professional support is at your disposal.

CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON

To put your Canon printer into service mode, follow these steps:

  1. Apague su impresora Canon.
  2. Press and hold the STOP button on your Canon printer.
  3. While holding the STOP button, press and hold the ON/OFF button (wait a moment for the printer to turn on).
  4. Release the STOP button but keep holding the ON/OFF button.
  5. Now, while still holding the ON/OFF button, press and release the STOP button 5 times.
  6. After pressing and releasing the STOP button 5 times, release the ON/OFF button after a short wait.

Video instructions for entering the printer into service mode

NOTE: Printer series:

G, MB, TR, TS – press “STOP” 5 times
MG – 6 times press “STOP”
MP – 2 times press “STOP”

Some models may have a unique procedure for entering service mode. You can find the documented procedures on our website:

CANON – method of entering service mode

NOTE: TO CLEAR THE CANON PRINTER ERROR:

  • The printer must be put into service mode – without this, the counter cannot be reset.
  • The printer must have no other errors than 1700 or 5B00, indicating that the life of the ink absorbing pads is coming to an end.
  • In service mode, the GREEN LED should be continuously on.

Do not purchase a key if:

  • Your printer is not on the supported models list.
  • When you put the printer into service mode, the green or orange LED blinks – you must first resolve other errors (such as an unprinted document, missing cartridge, unrecognized cartridge, etc.).
  • You cannot put the printer into service mode – attempting to enter “service mode” by pressing the “STOP” button a different number of times than specified will not allow you to perform a reset. This enters a programming mode, in which a reset cannot be performed.

Lo que necesita

  • Tecla WicReset Connect (sólo unos 6 euros - la opción más barata)
  • PC con Windows
  • Cable USB

Tiempo necesario

Alrededor de 2 minutos

Dificultad

Muy fácil

Funciona en caso de error

  • Epson: E10, E11, E12, E91 y errores de servicio similares
  • Canon: 1700, 5800 y similares tinta residual / errores de código de soporte
  • Mensajes como “Contador de tinta residual lleno”, “Tampón de tinta al final de su vida útil”

Series de impresoras compatibles

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serie L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF y muchas otras series populares.

Restablecer el servicio de almohadillas de tinta Epson

Si tu Epson muestra mensajes como “La almohadilla de tinta está al final de su vida útil”, “Se requiere servicio de almohadilla de tinta” o “Bloc de tinta lleno”, puede restablecer el servicio de almohadillas de tinta Epson mediante una tecla WicReset Connect. El programa restablece el contador interno de tinta residual, por lo que la impresora vuelve a funcionar sin necesidad de acudir a un centro de servicio.

  • Corrige en pocos minutos los avisos “Epson ink pad service” / “Service required”.
  • Funciona como restablecer el servicio de almohadillas de tinta Epson solución para la mayoría de impresoras EcoTank, serie L, serie ET, XP, WF y Stylus.
  • No se necesita un reseteador de hardware: sólo un PC con Windows, un cable USB y WicReset Connect.

FAQ (corto)

P: ¿Es necesario sustituir la almohadilla de tinta física?
R: En la mayoría de los casos domésticos y de oficina, basta con restablecer el contador de tinta residual con WicReset Connect y seguir utilizando la impresora con normalidad.

P: ¿Se trata de un reinicio único?
R: Cada tecla reinicia el contador una vez. Puede repetir el procedimiento en el futuro con otra tecla si el mensaje aparece de nuevo.