reinicialização do wic

PROGRAM 
LIGAÇÃO DE REINICIALIZAÇÃO WIC

is used to reset the counter of the absorber, the used ink container, which is found in Canon printers.

Canon printers track the number of head cleanings and pages printed. Based on this data, they estimate how full the waste ink container is, which often isn’t actually completely full. In such cases, the Wic Reset Connect program offers an excellent solution, allowing you to easily reset the printer’s counter and continue using it. Eventually, the container will physically need replacement once it’s truly full. However, until that point, you can avoid costly servicing by simply resetting the counter.

DOWNLOAD WIC RESET CONNECT

VIEW THE INSTRUCTIONS BEFORE PERFORMING A RESET !!!

We have prepared a professional video tutorial for you, featuring an instructor who demonstrates step-by-step how to reset the absorber counter. With this guide, you can effortlessly reset your printer’s counter. You’ll also learn how to address the most common issues. Should you need it, our immediate, professional support is at your disposal.

CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON

To put your Canon printer into service mode, follow these steps:

  1. Desligue a impressora Canon.
  2. Press and hold the STOP button on your Canon printer.
  3. While holding the STOP button, press and hold the ON/OFF button (wait a moment for the printer to turn on).
  4. Release the STOP button but keep holding the ON/OFF button.
  5. Now, while still holding the ON/OFF button, press and release the STOP button 5 times.
  6. After pressing and releasing the STOP button 5 times, release the ON/OFF button after a short wait.

Video instructions for entering the printer into service mode

NOTE: Printer series:

G, MB, TR, TS – press “STOP” 5 times
MG – 6 times press “STOP”
MP – 2 times press “STOP”

Some models may have a unique procedure for entering service mode. You can find the documented procedures on our website:

CANON – method of entering service mode

NOTE: TO CLEAR THE CANON PRINTER ERROR:

  • The printer must be put into service mode – without this, the counter cannot be reset.
  • The printer must have no other errors than 1700 or 5B00, indicating that the life of the ink absorbing pads is coming to an end.
  • In service mode, the GREEN LED should be continuously on.

Do not purchase a key if:

  • Your printer is not on the supported models list.
  • When you put the printer into service mode, the green or orange LED blinks – you must first resolve other errors (such as an unprinted document, missing cartridge, unrecognized cartridge, etc.).
  • You cannot put the printer into service mode – attempting to enter “service mode” by pressing the “STOP” button a different number of times than specified will not allow you to perform a reset. This enters a programming mode, in which a reset cannot be performed.

O que é necessário

  • Tecla WicReset Connect (apenas cerca de 6 euros - a opção mais económica)
  • PC com Windows
  • Cabo USB

Tempo necessário

Cerca de 2 minutos

Dificuldade

Muito fácil

Funciona para erros

  • Epson: E10, E11, E12, E91 e erros de serviço semelhantes
  • Canon: 1700, 5800 e similares resíduos de tinta / erros de código de suporte
  • Mensagens como “Contador de tinta residual cheio”, “Almofada de tinta no fim da sua vida útil”

Séries de impressoras suportadas

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, série L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF e muitas outras séries populares.

Reiniciar o serviço de almofadas de tinta Epson

Se a Epson apresentar mensagens como “A almofada de tinta está no fim da sua vida útil”, “Serviço de almofada de tinta necessário” ou “Almofada de tinta residual cheia”, pode reiniciar o serviço de almofada de tinta Epson utilizando uma chave WicReset Connect. O programa reinicia o contador interno de resíduos de tinta, para que a impressora volte a funcionar sem ter de se deslocar a um centro de assistência.

  • Corrige os avisos “Epson ink pad service” / “Service required” em poucos minutos.
  • Funciona como reiniciar o serviço de almofadas de tinta Epson solução para a maioria das impressoras EcoTank, série L, série ET, XP, WF e Stylus.
  • Não é necessário um reiniciador de hardware - apenas um PC com Windows, um cabo USB e o WicReset Connect.

FAQ (curta)

P: É necessário substituir a almofada de tinta física?
R: Na maioria dos casos domésticos e de escritório, basta repor o contador de resíduos de tinta com o WicReset Connect e continuar a utilizar a impressora normalmente.

P: Trata-se de uma reposição única?
R: Cada tecla repõe o contador uma vez. Pode repetir o procedimento no futuro com outra tecla se a mensagem voltar a aparecer.