ponastavitev sistema wic

PROGRAM 
WIC RESET CONNECT

is used to reset the counter of the absorber, the used ink container, which is found in Canon printers.

Canon printers track the number of head cleanings and pages printed. Based on this data, they estimate how full the waste ink container is, which often isn’t actually completely full. In such cases, the Wic Reset Connect program offers an excellent solution, allowing you to easily reset the printer’s counter and continue using it. Eventually, the container will physically need replacement once it’s truly full. However, until that point, you can avoid costly servicing by simply resetting the counter.

DOWNLOAD WIC RESET CONNECT

VIEW THE INSTRUCTIONS BEFORE PERFORMING A RESET !!!

We have prepared a professional video tutorial for you, featuring an instructor who demonstrates step-by-step how to reset the absorber counter. With this guide, you can effortlessly reset your printer’s counter. You’ll also learn how to address the most common issues. Should you need it, our immediate, professional support is at your disposal.

CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON
CANON

To put your Canon printer into service mode, follow these steps:

  1. Izklopite tiskalnik Canon.
  2. Press and hold the STOP button on your Canon printer.
  3. While holding the STOP button, press and hold the ON/OFF button (wait a moment for the printer to turn on).
  4. Release the STOP button but keep holding the ON/OFF button.
  5. Now, while still holding the ON/OFF button, press and release the STOP button 5 times.
  6. After pressing and releasing the STOP button 5 times, release the ON/OFF button after a short wait.

Video instructions for entering the printer into service mode

NOTE: Printer series:

G, MB, TR, TS – press “STOP” 5 times
MG – 6 times press “STOP”
MP – 2 times press “STOP”

Some models may have a unique procedure for entering service mode. You can find the documented procedures on our website:

CANON – method of entering service mode

NOTE: TO CLEAR THE CANON PRINTER ERROR:

  • The printer must be put into service mode – without this, the counter cannot be reset.
  • The printer must have no other errors than 1700 or 5B00, indicating that the life of the ink absorbing pads is coming to an end.
  • In service mode, the GREEN LED should be continuously on.

Do not purchase a key if:

  • Your printer is not on the supported models list.
  • When you put the printer into service mode, the green or orange LED blinks – you must first resolve other errors (such as an unprinted document, missing cartridge, unrecognized cartridge, etc.).
  • You cannot put the printer into service mode – attempting to enter “service mode” by pressing the “STOP” button a different number of times than specified will not allow you to perform a reset. This enters a programming mode, in which a reset cannot be performed.

Kaj potrebujete

  • WicReset Priključite tipko (samo približno 6 € - najcenejša možnost)
  • Računalnik z operacijskim sistemom Windows
  • Kabel USB

Potreben čas

Približno 2 minuti

Težavnost

Zelo enostavno

Deluje za napake

  • Epson: E10, E11, E12, E91 in podobne servisne napake
  • Canon: 1700, 5800 in podobne napake pri uporabi odpadnega črnila / podporne kode
  • Sporočila, kot so “Poln števec odpadnega črnila”, “Blazinica za črnilo je na koncu življenjske dobe”.”

Podprte serije tiskalnikov

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, serija L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF in številne druge priljubljene serije.

Ponastavitev servisa črnilne blazinice Epson

Če vaš Epson prikazuje sporočila, kot so “Blazinica za črnilo je na koncu življenjske dobe”, “Potrebna je storitev črnilne blazinice” ali “Polna blazinica za odpadno črnilo”, lahko ponastavitev servisne storitve Epsonove črnilne blazinice s ključem WicReset Connect. Program ponastavi notranji števec odpadnega črnila, tako da tiskalnik spet deluje brez obiska servisnega centra.

  • V nekaj minutah odpravi opozorila “Epson ink pad service” / “Service required”.
  • Deluje kot ponastavitev servisa črnilne blazinice Epson rešitev za večino tiskalnikov EcoTank, L-series, ET-series, XP, WF in Stylus.
  • Ponastavitev strojne opreme ni potrebna - samo računalnik z operacijskim sistemom Windows, kabel USB in program WicReset Connect.

Pogosta vprašanja in odgovori (kratek film)

V: Ali moram zamenjati fizično blazinico za črnilo?
O: V večini domačih in pisarniških primerov lahko s programom WicReset Connect samo ponastavite števec odpadnega črnila in tiskalnik še naprej normalno uporabljate.

V: Ali gre za enkratno ponastavitev?
O: Vsaka tipka enkrat ponastavi števec. Če se sporočilo ponovno prikaže, lahko postopek v prihodnosti ponovite z drugo tipko.