Guide de réinitialisation des erreurs de service des tampons d'encre Epson et Canon pour les codes E11, « Service requis » et 5B00

Epson ET-2650

Epson ET-2650 Reset – Fix E11 and Service Required

If your printer suddenly refuses to print, do not assume it is broken. A service message can appear when the internal waste ink counter reaches its protection limit. This page focuses on Epson E11 Error, Epson E10 Error, Epson E12 Error, Epson E91 Error, Service Required, Maintenance Box Full Epson and Ink Pad Reset Required Epson.

Use WicReset Connect to perform the reset. Use WIC Reset Utility only to read the waste ink counter and check printer communication.

Acheter la clé de réinitialisation Download WicReset Connect Read Waste Counters

Why this is often faster than service

If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.

Messages covered on this page

Epson E11 Error

Common ink pad or waste ink counter warning.

Epson E10 Error

Service-style warning that should be checked with the counter value.

Epson E12 Error

Maintenance message often seen when printing is blocked.

Epson E91 Error

Epson service warning where USB detection and counter reading are useful first checks.

Maintenance Box Full Epson

May be related to a physical maintenance box or internal counter depending on the model.

Ink Pad Reset Required Epson

Direct message that usually points to the ink pad or waste ink counter limit.

Why this matters for this EcoTank printer

This model is often used for home office work, daily documents and low-cost ink tank printing. When it stops with a counter warning, the problem is not only the printer but also lost time. A correct reset can be faster than replacing the printer.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

How to reset Epson ET-2650 by USB

  1. Connect the printer directly to a Windows computer by USB.
  2. Close other Epson tools.
  3. Read the counter with Utility if you want confirmation.
  4. Download WicReset Connect.
  5. Run WicReset Connect as administrator.
  6. Enter the reset key.
  7. Start the reset and wait.
  8. Restart the printer for about 10 seconds.

Do not disconnect the printer while the reset is running. If detection fails, fix the USB connection before using the key again.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Utility is only for checking

Use WIC Reset Utility only to read the waste ink counter and check communication. Use WicReset Connect for the actual reset. This avoids entering a key in the wrong place.

Why this is often faster than service

If the printer is blocked only by the counter, a reset key can restore printing much faster than sending the printer to a service centre. This is useful when you need documents printed today.

Model name check

This page is prepared for Epson ET-2650. Common short name: ET-2650. If you are not sure about compatibility, use the supported printer search before buying a key.

Why the exact model matters

Similar Epson names do not always mean the same reset function. Use the supported printer search if you are not sure about the exact printer name shown in Windows.

Useful official links

FAQ – Epson ET-2650

Will new ink remove the warning?

No. Ink level and waste ink counter are different. Adding ink will not reset the counter.

What should I do after reset?

Turn the printer off for about 10 seconds, turn it on and print a test page.

Can I check the counter before buying?

Yes. Download WIC Reset Utility and use it only to read the waste ink counter.

Why is administrator mode important?

Windows permissions can block communication. Running WicReset Connect as administrator helps avoid detection problems.

Can WIC Reset Utility reset Epson ET-2650?

Use WIC Reset Utility only to read counters and check communication. Use WicReset Connect for the reset.

Can one key reset more than one printer?

No. One key is for one reset. Use multi-key offers for multiple printers.

USB connection matters

Do not reset through Wi-Fi, network printing or a USB hub. A direct USB cable gives the program stable communication with the printer and avoids many failed reset attempts.

Reset Epson ET-2650 now

If your Epson ET-2650 is blocked by E11, E10, E12, E91, Service Required, Maintenance Box Full or Ink Pad Reset Required, start with USB detection and the official WicReset Connect download.

Acheter la clé de réinitialisation Download WicReset Connect Read Waste Counters

Corriger l'erreur “Le tampon encreur a besoin d'être réparé” - Modèles Epson pris en charge

Ce dont vous avez besoin

  • Touche WicReset Connect (uniquement environ 6 euros - l'option la moins chère)
  • PC Windows
  • Câble USB

Temps nécessaire

Environ 2 minutes

Difficulté

Très facile

Travaux en cas d'erreurs

  • Epson : E10, E11, E12, E91 et erreurs de service similaires
  • Canon : 1700, 5800 et similaires : encre usagée / erreurs de code de support
  • Messages tels que “Compteur d'encre de rebut plein”, “Tampon encreur en fin de vie”.”

Séries d'imprimantes prises en charge

Epson : Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, série L, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF et bien d'autres séries populaires.

Réinitialisation du service de tampon encreur Epson

Si votre Epson affiche des messages tels que “Le tampon encreur a atteint la fin de sa durée de vie.”, “Service de tampon encreur requis” ou “Le tampon encreur est plein”, vous pouvez réinitialiser le service de tampon encreur Epson à l'aide d'une clé WicReset Connect. Le programme réinitialise le compteur interne d'encre usagée, de sorte que l'imprimante fonctionne à nouveau sans avoir à se rendre dans un centre de service.

  • Corrige les avertissements “Epson ink pad service” / “Service required” en quelques minutes.
  • Fonctionne comme un réinitialisation du service de tampon encreur Epson pour la plupart des imprimantes EcoTank, série L, série ET, XP, WF et Stylus.
  • Aucun réinitialisateur matériel n'est nécessaire - il suffit d'un PC Windows, d'un câble USB et de WicReset Connect.

FAQ (court)

Q : Dois-je remplacer le tampon encreur physique ?
R : Dans la plupart des cas, à la maison ou au bureau, il suffit de réinitialiser le compteur d'encre usagée avec WicReset Connect et de continuer à utiliser l'imprimante normalement.

Q : S'agit-il d'une réinitialisation unique ?
R : Chaque touche remet le compteur à zéro une fois. Vous pouvez répéter la procédure à l'avenir avec une autre touche si le message apparaît à nouveau.

Étiquettes: , , , , ,