Epson XP-345 Reset – Fix Service Required & Waste Ink Pad Full

The Epson XP-345 reset is needed when the printer reaches the internal waste ink counter limit. This counter records ink used during cleaning and maintenance. When the counter reaches its limit, the printer can block printing even when the cartridges still have ink.

This is a common issue on Epson Expression Home printers. The correct solution is not reinstalling drivers or replacing cartridges. The correct solution is to reset the compteur d'encre usagée en utilisant WicReset Connect.

Epson XP-345 messages fixed by waste ink counter reset

This guide is for users searching for a fix for these Epson XP-345 errors and warnings:

• Parts inside your printer are near the end of their service life
• The waste ink pad is full. Contact Epson support
• The printer's ink pads are nearing the end of their service life
• Maintenance Box Full
• Ink Pad Reset Required
• Erreur E11
• Error E10
• Error E12
• Error E91

Why Epson XP-345 shows Service Required

The Epson XP-345 has an internal waste ink counter. Every time the printer performs cleaning or maintenance, some ink is counted as waste ink. After many cycles, the counter reaches a limit set inside the printer.

When this happens, the printer may display Service Required or a message saying that the ink pads are near the end of their service life. This is why the printer may refuse to print even if everything else looks normal.

How to reset Epson XP-345 waste ink counter

You can reset your Epson XP-345 at home. You need a Windows computer, a USB cable, WicReset Connect and a valid reset key.

After restarting the printer, the Epson XP-345 should return to normal operation if the warning was caused by the waste ink counter.

What you need for Epson XP-345 reset

Useful links for Epson XP-345 reset

Related Epson XP-345 search phrases

Epson XP-345 reset, Epson XP-345 resetter, Epson XP-345 Service Required, Epson XP-345 Error E11, Epson XP-345 waste ink counter reset, Epson XP-345 ink pad reset, Epson XP-345 waste ink pad full, Epson XP-345 ink pads nearing end of service life, Epson XP-345 Parts inside your printer are near the end of their service life, Epson XP-345 Ink Pad Reset Required, Epson XP-345 Maintenance Box Full, reset Epson XP-345 printer, Epson Expression Home XP-345 reset key, how to fix Epson XP-345 Service Required.

Does Epson XP-345 reset fix all printer problems?

No. WicReset Connect resets the waste ink counter. It does not repair mechanical damage, broken sensors, paper feed faults, cartridge recognition problems, damaged printheads or mainboard faults.

But if your Epson XP-345 shows Service Required, The waste ink pad is full, Ink Pad Reset Required or an ink pad service life warning, the waste ink counter reset is the correct solution.

FAQ – Epson XP-345 Reset

How do I fix Epson XP-345 Service Required?

Reset the Epson XP-345 waste ink counter with WicReset Connect, then restart the printer by turning it off for about 10 seconds and turning it on again.

What does Epson XP-345 waste ink pad full mean?

It means the internal waste ink counter has reached its limit and the printer needs a waste ink counter reset.

Can WicReset Connect reset Epson XP-345?

Yes. WicReset Connect is used to reset the waste ink counter in supported Epson printers, including Epson XP-345.

Do I need to replace cartridges before reset?

No. Cartridge replacement does not clear the waste ink counter warning. The internal counter must be reset.

Do I need a USB cable?

Yes. Use a direct USB connection between the Epson XP-345 and the Windows computer.

What should I do after the reset?

Turn the printer off, wait about 10 seconds, then turn it on again. This restart is important after the reset.