Canon IP4760 – Waste Ink Counter Reset

Canon IP4760 “ink absorber full” solution – complete waste ink counter reset

Canon IP4760 uses a waste ink counter that disables the printer at a programmed limit, triggering errors like 5B00, 5B02 and 1700. With WICReset Connect, you can reset this counter safely via USB.

Buy Canon Reset Key (from 6 EUR) Video Instructions & Download

Find Supported Canon Models

Quick Summary

Enter service mode on Canon IP4760
Download & install WICReset Connect
Connect your printer via USB
Reset takes about 2 minutes

Required Step

How to Enter Service Mode on Canon IP4760

Follow this exact sequence:

Turn off your Canon printer.
Press and hold the Canon printer’s RESET button.
Press and hold the printer’s POWER button (wait a moment for the printer to turn on).
Release the RESET button but continue to hold the POWER button.
While holding the POWER button, press and release the RESET button 5 times.
After pressing and releasing the RESET button for the 5th time, wait a moment before releasing the POWER button.

If the printer does not enter service mode, unplug it for 10–15 seconds and repeat the sequence.

More methods available here:

All Canon Service Mode Guides

How to Reset Waste Ink Counter on Canon IP4760 – Step-by-Step

Step 1 – Download WICReset Connect

Click the button below to download WICReset Connect for Canon printers:

Download WICReset Connect

Step 2 – Enter Service Mode & Connect via USB

Ensure Canon IP4760 is in service mode.
Connect to your PC using a USB cable.
Wi-Fi is not supported for resetting.

Step 3 – Open WICReset Connect

Open WICReset Connect as Administrator.

Step 4 – Enter Your Reset Key & Click RESET

Buy a reset key using the button below.
Enter the key in the program.
Click RESET to start the operation.

Buy Canon Reset Key

The reset takes about 2 minutes.

Step 5 – Restart Printer

Wait until the program confirms completion.
Turn the printer off for 10 seconds.
Turn it back on — errors should disappear.

Canon IP4760 Error Codes Explained

5B00 – waste ink absorber full
1700 – ink absorber almost full
5B02 – ink absorber full (reset required)

These errors do not mean your Canon IP4760 is damaged. It only means the internal waste ink counter reached 100% and must be reset.

WICReset Connect resets the counter safely in about 2 minutes.

Video Instructions – Canon Reset Tutorial

Watch the official Canon reset tutorial with voice-over and step-by-step explanation:

Open Video Instructions (Canon)

Available in 10 languages. Follow the video for a fast, safe reset.

FAQ – Canon IP4760 Reset

What does error 1700 mean on Canon IP4760?

It’s a warning that the waste ink absorber is nearly full.

How do I remove 5B02 on Canon IP4760?

Enter service mode and run the reset with a valid key.

Do I need internet access for the reset?

Only to download the software — the reset works offline.

Is it safe to reset the waste ink counter?

Yes, the procedure is designed specifically for this printer series.

Does the program detect my printer automatically?

Yes, once connected via USB and in service mode.

Reset Your Canon IP4760 Now

Restore your Canon IP4760 and eliminate waste ink counter warnings quickly and easily.

Buy Reset Key Supported Models