Reset Epson K300 in 2 Minutes – Remove Error E11 & Service Required
Got Ink Pad Needs Service on Epson K300? The waste ink counter reached its threshold. Reset via WicReset Connect with a key (from 6 EUR). Takes ~2 minutes over USB on Windows 7–11.
Common Symptoms – Epson K300
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson K300 stops
The service message on Epson K300 is usually software-based: the waste ink counter. Resetting that counter clears the alert and unlocks the printer.
Quick facts – Epson K300 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson K300 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson K300. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson K300
- Connect Epson K300 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson K300
Can I reset at 100% lock?
Yes — but many users reset proactively at ~95% to avoid downtime.
Will I see the counter after reset?
Yes — it should read 0% (or close) after successful reset.
Do I need to power-cycle?
Yes — turn the printer off/on after the reset completes.
Can I keep printing large jobs after reset?
Yes — monitor the counter and maintain the device as usual.
Any risks to cartridges?
No — cartridges/ink system aren’t altered by the reset.
Tips for Epson K300 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson K300 reset instructions using WicReset Connect.