Fix Epson Ink Pad Needs Service & Canon Error 5B00

Epson L3201 Reset – Clear Error E11 / “Service Required” Fast

Fix blocked printing with WicReset Connect. Works on Windows 7–11 via USB.

🔑 Buy WicReset Connect key

If your Epson L3201 printer refuses to print and shows Error E11 or “Service required”, the problem is the waste ink counter. Once this counter reaches its limit, the printer locks itself. Luckily, you can reset it in just a few minutes using WicReset Connect.

What happens when Epson L3201 shows Error E11

  • Error message: “Service required”.
  • Error code E11 during printing.
  • Flashing red lights and blocked printing.

Why this error appears

The printer monitors waste ink through an internal waste ink counter. When it reaches 100%, the machine disables printing. Resetting the counter with WicReset Connect removes the error instantly.

How to reset Epson L3201

  1. Download WicReset Connect.
  2. Connect Epson L3201 to your PC via USB cable (Wi-Fi reset is not supported).
  3. Open the program, enter your purchased reset key and press RESET.
  4. Wait around 2 minutes for the process to finish.
  5. Turn the printer OFF for 10 seconds, then power it ON again.

👉 Need a reset key? Buy WicReset Connect key here

FAQ – Epson L3201 Reset

Does WicReset Connect remove Error E11?
✅ Yes, the reset clears the waste ink counter and unlocks printing.

Do the pads need replacing?
❌ Usually not. The counter is an estimate — after reset, the printer works normally.

Do I need Wi-Fi for reset?
No — USB only. Wi-Fi reset is not possible.

Which Windows versions are supported?
Works on Windows 7, 8, 10 and 11.

Tips to avoid Epson L3201 lock error

  • Reset the counter at ~95% before it reaches 100%.
  • Use a high-quality USB cable during reset.
  • Avoid unnecessary head cleanings to reduce waste ink usage.

🔑 Buy WicReset Connect key

Related Epson printers

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.