Epson L3201 Reset – Clear Error E11 / “Service Required” Fast
Fix blocked printing with WicReset Connect. Працює на Windows 7-11 через USB.
If your Epson L3201 printer refuses to print and shows Помилка E11 або “Потрібна послуга”, the problem is the лічильник відпрацьованого чорнила. Once this counter reaches its limit, the printer locks itself. Luckily, you can reset it in just a few minutes using WicReset Connect.
What happens when Epson L3201 shows Error E11
- Повідомлення про помилку: “Потрібна послуга”.
- Error code E11 during printing.
- Flashing red lights and blocked printing.
Why this error appears
The printer monitors waste ink through an internal лічильник відпрацьованого чорнила. When it reaches 100%, the machine disables printing. Resetting the counter with WicReset Connect removes the error instantly.
How to reset Epson L3201
- Завантажити WicReset Connect.
- Connect Epson L3201 to your PC via USB-кабель (Wi-Fi reset is not supported).
- Open the program, enter your purchased клавіша скидання and press СКИДАННЯ.
- Wait around 2 minutes for the process to finish.
- Turn the printer OFF for 10 seconds, then power it ON again.
👉 Need a reset key? Buy WicReset Connect key here
FAQ – Epson L3201 Reset
Does WicReset Connect remove Error E11?
✅ Yes, the reset clears the waste ink counter and unlocks printing.
Do the pads need replacing?
❌ Usually not. The counter is an estimate — after reset, the printer works normally.
Do I need Wi-Fi for reset?
No — USB only. Wi-Fi reset is not possible.
Which Windows versions are supported?
Works on Windows 7, 8, 10 and 11.
Tips to avoid Epson L3201 lock error
- Reset the counter at ~95% before it reaches 100%.
- Use a high-quality USB cable during reset.
- Avoid unnecessary head cleanings to reduce waste ink usage.
English 
Čeština 
Deutsch 
Español 
Français 
Hrvatski 
Magyar 
Italiano 
Nederlands 
Português 
Slovenščina 
Українська