Fix Epson Ink Pad Needs Service & Canon Error 5B00
Epson L3238 Service required – Reset waste ink counter (Error E11 fix)

Epson L3238 – Reset & Remove Service required message

When Epson L3238 shows Error E11 or Service required, it means the waste ink counter is full. Use WicReset Connect to reset it quickly on Windows 7–11 (USB only). Keys cost from 6 EUR.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Signs of Epson L3238 waste ink error

  • Printing blocked, warning lights flashing.
  • Error message: Error E11 / Service required.
  • Waste ink counter close to 100 % usage.

Why does Epson L3238 display Error E11?

This happens because Epson uses an internal waste ink counter. When the counter limit is reached, the printer locks with “Service required”. Resetting clears the counter and restores printing.

Quick facts – Epson L3238 reset

ModelErrorSolutionOSReset time
Epson L3238Error E11 / Service requiredWicReset ConnectWindows 7–11 (USB)~2 min

Reset tool download

⬇️ WicReset Connect (Windows)

No official Epson driver link verified for L3238 — driver section omitted until confirmed.

Video guide

▶ Watch reset tutorial for Epson printers

Available in 10 languages with narrator voice.

How to reset Epson L3238 (step-by-step)

  1. Connect Epson L3238 to PC via USB cable.
  2. Open WicReset Connect and check if the printer is detected.
  3. Enter your purchased reset key and press Reset.
  4. Wait ~2 minutes, switch off for 10 seconds, then turn the printer back on.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson L3238

Will reset remove Error E11?

✅ Yes, the printer unlocks and you can print again.

Are ink pads really full?

No — the error is based on a counter, not sensors.

Which systems are supported?

Windows 7, 8, 10, 11 via USB connection.

How often is reset needed?

Whenever the counter reaches its threshold again.

Tips for Epson L3238 users

  • Tip Reset when counter is ~95% instead of waiting for full lock.
  • Avoid running unnecessary head cleaning cycles.
  • Use a high-quality USB cable during reset.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

Related Epson models

This page is dedicated to Epson L3238 reset.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.