Epson L3269 – Reset & Clear Error E11
Reset the waste ink counter on Epson L3269 using WicReset Connect. Works with Windows 7–11 via USB. Reset keys start from 6 EUR.
Fix “Service required” on Epson L3269
If Epson L3269 displays Error E11 or “Ink pad needs service”, it means the waste ink counter reached its limit. Resetting with WicReset Connect restores normal operation.
Quick facts – Epson L3269 reset
| Model | Error | Solution | Supported OS | Reset time |
|---|---|---|---|---|
| Epson L3269 | Error E11 / Service required | WicReset Connect | Windows 7–11 (USB) | ~2 minutes |
Symptoms
- Printer refuses to print; LEDs flashing.
- Error messages: Error E11, Service required.
- Waste ink counter close to 100%.
Why does Epson L3269 show “Service required”?
The error is triggered by an internal counter, not sensors. When it reaches 100%, Epson L3269 locks itself. Resetting with WicReset Connect clears the error.
Download reset tool & driver
The official driver for the L3260 Series (covers Epson L3269) is available from Epson Setup Navi:
⬇️ Download Epson L3260 Series driver
Instructional Video – Epson L3269 reset
▶️ Watch official WicReset Connect tutorial
ℹ️ Video available in 10 languages with professional narration.
Step-by-step reset (Epson L3269)
- Connect Epson L3269 to your PC via USB.
- Run WicReset Connect and confirm printer detection.
- Enter your purchased reset key and click Reset.
- Wait ~2 minutes, turn off for 10 seconds, then restart the printer.
FAQ – Epson L3269
Does reset clear Error E11?
✅ Yes, the printer is unlocked.
Are pads physically full?
No, just the counter reached 100%.
Can reset be done via Wi-Fi?
❌ No, only USB is supported.
How long does reset last?
Until the counter fills again after thousands of prints.
More about Epson L3269 reset
- Tip Reset around 95% usage.
- Avoid unnecessary head cleaning cycles.
- Always use a good USB cable.
- Keys start from 6 EUR.
Related Epson models
This page is dedicated to Epson L3269 reset.
Fix “The Ink Pad Needs Service” Error – Supported Epson Models
What you need
- WicReset Connect key (only about €6 – the cheapest option)
- Windows PC
- USB cable
Time required
About 2 minutes
Difficulty
Very easy
Works for errors
- Epson: E10, E11, E12, E91 and similar service errors
- Canon: 1700, 5800 and similar waste ink / support code errors
- Messages like “Waste ink counter full”, “Ink pad at the end of its service life”
Supported printer series
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.
Reset Epson ink pad service
If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.
- Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
- Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
- No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.
FAQ (short)
Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.
Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

