Fix Epson Ink Pad Needs Service & Canon Error 5B00
Epson L3273 reset – Fix Error E11 / “Service required” (Windows USB)

Epson L3273 – Reset & Clear Error E11

Reset the waste ink counter on Epson L3273 using WicReset Connect. Fully compatible with Windows 7–11 via USB. Reset keys available from 6 EUR.

🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

Fix “Service required” on Epson L3273

When Epson L3273 displays Error E11 or “Ink pad needs service”, the waste ink counter is full. Resetting with WicReset Connect solves the problem.

Quick facts – Epson L3273 reset

ModelErrorSolutionSupported OSReset time
Epson L3273Error E11 / Service requiredWicReset ConnectWindows 7–11 (USB)~2 minutes

Symptoms

  • Printer stops printing; LEDs flashing.
  • Shows Error E11 or Service required.
  • Waste ink counter at 100%.

Why does Epson L3273 show “Service required”?

This error is based on the internal waste ink counter. Once it reaches 100%, Epson L3273 locks. Resetting with WicReset Connect clears the counter and restores printing.

Download reset tool & driver

⬇️ Download WicReset Connect (Windows 7–11)

The official driver for the L3260 Series (includes Epson L3273) is available via Epson Setup Navi:

⬇️ Download Epson L3260 Series driver

Instructional Video – Epson L3273 reset

▶️ Watch WicReset Connect tutorial

ℹ️ Tutorial is available in 10 languages with professional narration.

Step-by-step reset (Epson L3273)

  1. Connect Epson L3273 to your PC using a USB cable.
  2. Run WicReset Connect and check printer detection.
  3. Enter your purchased reset key and click Reset.
  4. Wait 2 minutes, power off for 10s, then restart Epson L3273.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

FAQ – Epson L3273

Does reset remove Error E11?

✅ Yes, printing resumes immediately.

Are pads physically full?

No, the counter triggered the lock.

Can I reset via Wi-Fi?

❌ No, USB only.

How long will the reset last?

Until the counter fills again after many prints.

More about Epson L3273 reset

  • Tip Reset at ~95% to avoid downtime.
  • Don’t run unnecessary head cleanings.
  • Use a stable USB cable for reset.
  • Reset keys start at 6 EUR.
🔑 Buy Reset Key (from 6 EUR) ⬇️ Download WicReset Connect

Related Epson models

This page is dedicated to Epson L3273 reset.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.