Stop ‘Service Required’ on Epson R230 – Waste Ink Counter Reset
When your Epson R230 shows Error E11 or Service required, or warns Ink Pad Needs Service, the internal waste ink counter has reached its limit. Use WicReset Connect with a reset key to clear it in about 2 minutes. Keys start from 6 EUR. Works on Windows 7–11 via USB only.
Typical Signs on Epson R230
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson R230 stops
Most often, Epson R230 shows Service required due to the waste ink counter. Resetting this value removes the lock and restores normal function.
Quick facts – Epson R230 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson R230 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson R230. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson R230
- Connect Epson R230 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson R230
What if the printer is stuck offline?
Switch USB ports, replace cable, reinstall drivers and retry.
Can I reset from a company PC?
Yes — but ensure you have admin rights and no security blocks USB.
Why key rejected?
Check typos, internet connection, and that the model is supported.
Is there a log of the reset?
WicReset can show operation status; save screenshots for support.
Do I need to disable antivirus?
Usually not; if blocked, add the app to exceptions temporarily.
Tips for Epson R230 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson R230 reset instructions using WicReset Connect.