Epson T24 Locked by Waste Ink Counter? Reset & Print Again
When your Epson T24 shows Error E11 or Service required, or warns Ink Pad Needs Service, the internal waste ink counter has reached its limit. Use WicReset Connect with a reset key to clear it in about 2 minutes. Keys start from 6 EUR. Works on Windows 7–11 via USB only.
Symptoms – Epson T24
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson T24 stops
Epson T24 monitors maintenance waste via a waste ink counter. When the threshold is reached, the printer locks to avoid leakage. Resetting the counter usually restores normal operation; pads may not be actually full.
Quick facts – Epson T24 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson T24 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson T24. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson T24
- Connect Epson T24 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson T24
Why does my counter grow fast?
Frequent head cleanings and short print bursts increase waste ink.
How to slow it down?
Reduce unnecessary cleanings; print longer jobs when possible.
Can sleep mode affect detection?
Sometimes — wake the printer fully before connecting.
What languages are supported?
The tutorial is available in many languages with narration.
Can reset be done in a service center?
Yes — but WicReset lets you do it yourself at home/office.
Tips for Epson T24 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson T24 reset instructions using WicReset Connect.