Epson TX133 Resetting – Fix Service Required / Error E11
If E11 / Service required appears on Epson TX133, the waste ink counter needs resetting. Do it with WicReset Connect in ~2 minutes. Keys start at 6 EUR. USB + Windows 7–11.
Symptoms – Epson TX133
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson TX133 stops
Your Epson TX133 uses a waste ink counter to estimate absorbed ink. After reaching a set value, it stops printing. Resetting the counter removes the lock; actual pads may still have capacity.
Quick facts – Epson TX133 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson TX133 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson TX133. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson TX133
- Connect Epson TX133 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson TX133
How do I prepare for reset?
Install drivers, use a quality USB cable, run as admin.
Do I need to uninstall other Epson tools?
No — just close them during the reset.
Can the reset fail on unsupported models?
Yes — always verify compatibility before purchase.
Will reset clean print heads?
No — it only affects the waste ink counter.
Can I print a test page after reset?
Yes — recommended to confirm normal operation.
Tips for Epson TX133 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson TX133 reset instructions using WicReset Connect.