Epson TX730WD USB Reset – Clear Ink Pad Counter & Remove E11
Epson TX730WD shows E11 or Service required? That’s a full waste ink counter. Use WicReset Connect to clear it in minutes. Keys from 6 EUR. USB only on Windows 7–11.
When Epson TX730WD Needs Reset – Symptoms
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson TX730WD stops
Epson TX730WD stops to protect against possible overflow when the waste ink counter is high. A reset lifts the lock and printing resumes. The message can appear before pads are physically saturated.
Quick facts – Epson TX730WD reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson TX730WD | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson TX730WD. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson TX730WD
- Connect Epson TX730WD to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson TX730WD
Does reset clear Error E10, E11, E12, E91 / Service required?
✅ Yes — clearing the waste ink counter removes the error and restores printing.
Must I replace ink pads after reset?
Not necessarily — the error is triggered by counters, not always by physical pad saturation.
Can I reset via Wi-Fi?
No — reset works only over USB.
How long does it take?
Usually under 2 minutes.
Do I need a key?
Yes — WicReset Connect is free, but reset requires a paid single-use key.
Tips for Epson TX730WD reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson TX730WD reset instructions using WicReset Connect.