Epson XP-405 Error E11 Fix – Reset Ink Pad Counter via USB
Trouble printing on Epson XP-405? Error E11 usually means the waste ink counter is full. Clear it using WicReset Connect (USB). Reset time ~2 minutes. Keys from 6 EUR.
Common Symptoms – Epson XP-405
- Printer refuses to print, LEDs flashing.
- Shows Error E11 or Service required.
- Displays warning: Ink Pad Needs Service.
Why Epson XP-405 stops
Epson XP-405 stops to protect against possible overflow when the waste ink counter is high. A reset lifts the lock and printing resumes. The message can appear before pads are physically saturated.
Quick facts – Epson XP-405 reset
| Model | Error | Solution | OS | Reset time |
|---|---|---|---|---|
| Epson XP-405 | Error E11 / Ink Pad Needs Service | WicReset Connect | Windows 7–11 (USB only) | ~2 minutes |
Download reset tool & driver
No verified official Epson driver found for Epson XP-405. Please refer to Epson Setup Navi for compatible software.
Video tutorial
Available in many languages with narration.
Reset steps for Epson XP-405
- Connect Epson XP-405 to your PC via USB cable.
- Launch WicReset Connect and ensure the printer is detected.
- Buy a reset key, input it, and click Reset.
- Wait ~2 minutes, then turn the printer off and on again.
FAQ – Epson XP-405
Why blocked if pads aren’t full?
The counter is an estimate; it can lock before physical saturation.
Does resetting change ink levels?
No — it affects only the waste ink counter.
Can I reset over a USB hub?
Use a direct, high-quality USB cable for best stability.
Will I lose settings?
No — network/print settings remain.
Can I print immediately after reset?
Yes — power-cycle the printer and it’s ready.
Tips for Epson XP-405 reset
- Reset around ~95% to avoid full lock.
- Reduce unnecessary head cleanings.
- Use a short, high-quality USB cable for stability.
This page is dedicated to Epson XP-405 reset instructions using WicReset Connect.