Fix Epson Ink Pad Needs Service & Canon Error 5B00
Troubleshooting Epson XP-225: Reset E11 ‘Ink Pad Needs Service’

Troubleshooting Epson XP-225: Reset E11 ‘Ink Pad Needs Service’

If your Epson XP-225 shows Ink Pad Needs Service or Service required (E11), the waste ink counter likely hit its limit. Use WicReset Connect + key to reset in ~2 minutes. Keys from 6 EUR, Windows 7–11, USB.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

When Epson XP-225 Needs Reset – Symptoms

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson XP-225 stops

The printer estimates pad usage via the waste ink counter. Once Epson XP-225 crosses the threshold, it halts as a precaution. Clearing the counter resolves the block.

Quick facts – Epson XP-225 reset

ModelErrorSolutionOSReset time
Epson XP-225Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ Download WicReset Connect

No verified official Epson driver found for Epson XP-225. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in many languages with narration.

Reset steps for Epson XP-225

  1. Connect Epson XP-225 to your PC via USB cable.
  2. Launch WicReset Connect and ensure the printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson XP-225

What if the printer is stuck offline?

Switch USB ports, replace cable, reinstall drivers and retry.

Can I reset from a company PC?

Yes — but ensure you have admin rights and no security blocks USB.

Why key rejected?

Check typos, internet connection, and that the model is supported.

Is there a log of the reset?

WicReset can show operation status; save screenshots for support.

Do I need to disable antivirus?

Usually not; if blocked, add the app to exceptions temporarily.

Tips for Epson XP-225 reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

This page is dedicated to Epson XP-225 reset instructions using WicReset Connect.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.