Epson L3259 – Reset & Fix Error E11
Reset the waste ink counter on Epson L3259 easily with WicReset Connect. Works on Windows 7–11 via USB. Reset keys available from 6 EUR.
Fix “Service required” on Epson L3259
When Epson L3259 shows Error E11 or “Ink pad needs service”, it means the waste ink counter reached its limit. Resetting with WicReset Connect restores printing.
Quick facts – Epson L3259 reset
| Model | Error | Solution | Supported OS | Reset time |
|---|---|---|---|---|
| Epson L3259 | Error E11 / Service required | WicReset Connect | Windows 7–11 (USB) | ~2 minutes |
Symptoms
- Printer stops working, LEDs blinking.
- Error: Error E11, Service required, Ink pad end of life.
- Counter shows ~100% usage.
Why does Epson L3259 show “Service required”?
The error is software-based. Epson L3259 uses an internal counter to estimate waste ink. When it hits the maximum, the printer locks. Resetting the counter with WicReset Connect removes the error.
Download reset tool & driver
Official driver via Epson Setup Navi for the L3250 Series (includes Epson L3259):
⬇️ Download Epson L3250 Series driver
Instructional Video – Epson L3259 reset
▶️ Watch official WicReset Connect tutorial
ℹ️ Available in 10 languages with narration.
Step-by-step reset (Epson L3259)
- Connect Epson L3259 via USB to your PC.
- Launch WicReset Connect and ensure printer detection.
- Enter your purchased reset key and click Reset.
- Wait ~2 minutes, power off for 10s, then restart the printer.
FAQ – Epson L3259
Does reset clear Error E11?
✅ Yes, printing is restored.
Are the pads physically full?
No, it’s only the software counter.
Can reset be done via Wi-Fi?
❌ No, USB only.
How long does reset last?
Until the counter fills again after many cycles.
More about Epson L3259 reset
- Tip Reset when counter is ~95%.
- Reduce unnecessary head cleaning.
- Always use a reliable USB cable.
- Keys start from just 6 EUR.
Related Epson models
- Epson L3217 reset
- Epson L3218 reset
- Epson L3219 reset
- Epson L3250 reset
- Epson L3251 reset
- Epson L3253 reset
- Epson L3255 reset
- Epson L3256 reset
- Epson L3257 reset
- Epson L3258 reset
This page is dedicated to Epson L3259 reset.
Fix “The Ink Pad Needs Service” Error – Supported Epson Models
What you need
- WicReset Connect key (only about €6 – the cheapest option)
- Windows PC
- USB cable
Time required
About 2 minutes
Difficulty
Very easy
Works for errors
- Epson: E10, E11, E12, E91 and similar service errors
- Canon: 1700, 5800 and similar waste ink / support code errors
- Messages like “Waste ink counter full”, “Ink pad at the end of its service life”
Supported printer series
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.
Reset Epson ink pad service
If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.
- Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
- Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
- No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.
FAQ (short)
Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.
Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

