Fix Epson Ink Pad Needs Service & Canon Error 5B00
Reset Epson L5198 in 2 Minutes – Remove Error E11 & Service Required

Reset Epson L5198 in 2 Minutes – Remove Error E11 & Service Required

Epson L5198 error E11 / Service required indicates a full waste ink counter. Fix it fast with WicReset Connect. Keys start at 6 EUR. USB (Windows 7–11).

🔑 Buy Reset Key ⬇️ Download WicReset Connect

What You’ll See on Epson L5198

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson L5198 stops

A service lock on Epson L5198 is commonly tied to the waste ink counter reaching its threshold. Resetting the counter restores printing without physical maintenance in many cases.

Quick facts – Epson L5198 reset

ModelErrorSolutionOSReset time
Epson L5198Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ Download WicReset Connect

No verified official Epson driver found for Epson L5198. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in 10 languages with narration.

Reset steps for Epson L5198

  1. Connect Epson L5198 to your PC via USB cable.
  2. Launch WicReset Connect and ensure printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson L5198

Does reset clear Error E11 / Service required?

✅ Yes — clearing the waste ink counter typically removes the error and restores printing.

Must I replace ink pads?

Not necessarily — the error may arise from the counter rather than pad saturation.

Can I do reset over Wi-Fi?

No — reset only works via USB with WicReset Connect.

How long until reset completes?

It normally takes under 2 minutes.

Tips for Epson L5198 reset

  • Reset when usage is ~95%, not at full lock.
  • Reduce unnecessary head cleaning cycles.
  • Always use a high-quality USB cable for consistency.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

This page is dedicated to Epson L5198 reset instructions using WicReset Connect.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.