Epson and Canon ink pad service error reset guide for E11, Service Required and 5B00
Epson NX405 Locked by Waste Ink Counter? Reset & Print Again

Epson NX405 Locked by Waste Ink Counter? Reset & Print Again

Epson NX405 reporting Ink Pad Needs Service? Quickly reset the waste ink counter with WicReset Connect (USB). Keys start at 6 EUR. Windows 7–11.

🔑 Buy Reset Key ⬇️ Download WicReset Connect

Symptoms – Epson NX405

  • Printer refuses to print, LEDs flashing.
  • Shows Error E11 or Service required.
  • Displays warning: Ink Pad Needs Service.

Why Epson NX405 stops

The service message on Epson NX405 is usually software-based: the waste ink counter. Resetting that counter clears the alert and unlocks the printer.

Quick facts – Epson NX405 reset

ModelErrorSolutionOSReset time
Epson NX405Error E11 / Ink Pad Needs ServiceWicReset ConnectWindows 7–11 (USB only)~2 minutes

Download reset tool & driver

⬇️ Download WicReset Connect

No verified official Epson driver found for Epson NX405. Please refer to Epson Setup Navi for compatible software.

Video tutorial

▶ Watch WicReset tutorial

Available in many languages with narration.

Reset steps for Epson NX405

  1. Connect Epson NX405 to your PC via USB cable.
  2. Launch WicReset Connect and ensure the printer is detected.
  3. Buy a reset key, input it, and click Reset.
  4. Wait ~2 minutes, then turn the printer off and on again.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

FAQ – Epson NX405

Is there a model list?

Yes — check compatibility on the product page before buying the key.

Why key says “already used”?

Keys are single-use; ensure you pasted a fresh, unused code.

Can VPN/proxy block validation?

It can — use a direct connection if validation fails.

Will reset clear paper counters?

No — only the waste ink counter is affected.

Any logs to send support?

Provide screenshots of WicReset and error messages.

Tips for Epson NX405 reset

  • Reset around ~95% to avoid full lock.
  • Reduce unnecessary head cleanings.
  • Use a short, high-quality USB cable for stability.
🔑 Buy Reset Key ⬇️ Download WicReset Connect

This page is dedicated to Epson NX405 reset instructions using WicReset Connect.

Fix “The Ink Pad Needs Service” Error – Supported Epson Models

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • USB cable

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.

Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” or “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.