Epson EcoTank ET-2706 Error E11 Fix – Reset Ink Pad Counter via USB
Epson EcoTank ET-2706 displaying E11 / Diperlukan layanan? Itulah penghitung tinta sisa. Perbaiki dengan cepat menggunakan WicReset Connect. Kunci dari 6 EUR. Memerlukan USB pada Windows 7–11.
Typical Signs on Epson EcoTank ET-2706
- Printer tidak mau mencetak, lampu LED berkedip-kedip.
- Acara Kesalahan E11 atau Diperlukan layanan.
- Menampilkan peringatan: Bantalan Tinta Perlu Diservis.
Why Epson EcoTank ET-2706 stops
Most often, Epson EcoTank ET-2706 shows Service required due to the penghitung tinta sisa. Resetting this value removes the lock and restores normal function.
Quick facts – Epson EcoTank ET-2706 reset
| Model | Kesalahan | Solusi | Sistem Operasi | Waktu reset |
|---|---|---|---|---|
| Epson EcoTank ET-2706 | Kesalahan E11 / Bantalan Tinta Perlu Diservis | WicReset Connect | Windows 7–11 (hanya USB) | ~2 menit |
Download reset tool & driver
No verified official Epson driver found for Epson EcoTank ET-2706. Please refer to Panduan Pengaturan Epson untuk perangkat lunak yang kompatibel.
Video tutorial
Tersedia dalam berbagai bahasa dengan narasi.
Reset steps for Epson EcoTank ET-2706
- Connect Epson EcoTank ET-2706 to your PC via USB cable.
- Peluncuran WicReset Connect dan pastikan printer tersebut terdeteksi.
- Beli sebuah kunci reset, masukkan, lalu klik Atur Ulang.
- Tunggu sekitar 2 menit, lalu matikan dan nyalakan kembali printer tersebut.
FAQ – Epson EcoTank ET-2706
Why blocked if pads aren’t full?
The counter is an estimate; it can lock before physical saturation.
Does resetting change ink levels?
No — it affects only the waste ink counter.
Can I reset over a USB hub?
Use a direct, high-quality USB cable for best stability.
Will I lose settings?
No — network/print settings remain.
Can I print immediately after reset?
Yes — power-cycle the printer and it’s ready.
Tips for Epson EcoTank ET-2706 reset
- Atur ulang di sekitar ~95% untuk menghindari penguncian penuh.
- Kurangi pembersihan kepala yang tidak perlu.
- Gunakan kabel USB yang pendek dan berkualitas tinggi agar koneksinya stabil.
This page is dedicated to Epson EcoTank ET-2706 reset instructions using WicReset Connect.
Fix “The Ink Pad Needs Service” Error – Supported Epson Models
What you need
- WicReset Connect key (only about €6 – the cheapest option)
- Windows PC
- Kabel USB
Time required
About 2 minutes
Difficulty
Very easy
Works for errors
- Epson: E10, E11, E12, E91 and similar service errors
- Canon: 1700, 5800 and similar waste ink / support code errors
- Messages like “Waste ink counter full”, “Ink pad at the end of its service life”
Supported printer series
Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.
Reset Epson ink pad service
If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” atau “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.
- Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
- Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
- No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.
FAQ (short)
Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.
Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.