Sedikit penyegaran. Pencetakan yang jauh lebih banyak. Langsung dari Wic Reset Connect tim

Epson XP-2101 Locked by Waste Ink Counter? Reset & Print Again

When your Epson XP-2101 shows Kesalahan E11 atau Diperlukan layanan, or warns Bantalan Tinta Perlu Diservis, the internal penghitung tinta sisa has reached its limit. Use WicReset Connect with a reset key to clear it in about 2 minutes. Keys start from 6 EUR. Works on Windows 7–11 via USB only.

Symptoms – Epson XP-2101

  • Printer tidak mau mencetak, lampu LED berkedip-kedip.
  • Acara Kesalahan E11 atau Diperlukan layanan.
  • Menampilkan peringatan: Bantalan Tinta Perlu Diservis.

Why Epson XP-2101 stops

When the counter hits its cap, Epson XP-2101 prevents printing. Clearing the penghitung tinta sisa generally fixes the problem without pad replacement.

Quick facts – Epson XP-2101 reset

ModelKesalahanSolusiSistem OperasiWaktu reset
Epson XP-2101Kesalahan E11 / Bantalan Tinta Perlu DiservisWicReset ConnectWindows 7–11 (hanya USB)~2 menit

Download reset tool & driver

No verified official Epson driver found for Epson XP-2101. Please refer to Panduan Pengaturan Epson untuk perangkat lunak yang kompatibel.

Video tutorial

▶ Tonton tutorial WicReset

Tersedia dalam berbagai bahasa dengan narasi.

Reset steps for Epson XP-2101

  1. Connect Epson XP-2101 to your PC via USB cable.
  2. Peluncuran WicReset Connect dan pastikan printer tersebut terdeteksi.
  3. Beli sebuah kunci reset, masukkan, lalu klik Atur Ulang.
  4. Tunggu sekitar 2 menit, lalu matikan dan nyalakan kembali printer tersebut.

FAQ – Epson XP-2101

Can I reset multiple times?

As often as needed — each reset requires a new key.

Are trial keys available?

Yes — trial keys exist but reduce to ~80–90% only (no full reset).

Will drivers change?

No — resetting the counter doesn’t modify drivers.

Do I need to open the printer?

❌ No — everything is done via software and USB.

Is my data safe?

✅ Yes — only printer counters are accessed. Your files remain untouched.

Tips for Epson XP-2101 reset

  • Atur ulang di sekitar ~95% untuk menghindari penguncian penuh.
  • Kurangi pembersihan kepala yang tidak perlu.
  • Gunakan kabel USB yang pendek dan berkualitas tinggi agar koneksinya stabil.

This page is dedicated to Epson XP-2101 reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • Kabel USB

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” atau “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Tinggalkan Balasan

×

Cart