Sedikit penyegaran. Pencetakan yang jauh lebih banyak. Langsung dari Wic Reset Connect tim
Complete Reset for Epson XP-800: Service Required / E11 Resolved

Complete Reset for Epson XP-800: Service Required / E11 Resolved

Got Bantalan Tinta Perlu Diservis on Epson XP-800? The penghitung tinta sisa reached its threshold. Reset via WicReset Connect with a key (from 6 EUR). Takes ~2 minutes over USB on Windows 7–11.

Typical Signs on Epson XP-800

  • Printer tidak mau mencetak, lampu LED berkedip-kedip.
  • Acara Kesalahan E11 atau Diperlukan layanan.
  • Menampilkan peringatan: Bantalan Tinta Perlu Diservis.

Why Epson XP-800 stops

To avoid overflow risks, Epson XP-800 uses a penghitung tinta sisa. After the limit, it locks. Reset the counter to continue printing; pads can still be usable.

Quick facts – Epson XP-800 reset

ModelKesalahanSolusiSistem OperasiWaktu reset
Epson XP-800Kesalahan E11 / Bantalan Tinta Perlu DiservisWicReset ConnectWindows 7–11 (hanya USB)~2 menit

Download reset tool & driver

No verified official Epson driver found for Epson XP-800. Please refer to Panduan Pengaturan Epson untuk perangkat lunak yang kompatibel.

Video tutorial

▶ Tonton tutorial WicReset

Tersedia dalam berbagai bahasa dengan narasi.

Reset steps for Epson XP-800

  1. Connect Epson XP-800 to your PC via USB cable.
  2. Peluncuran WicReset Connect dan pastikan printer tersebut terdeteksi.
  3. Beli sebuah kunci reset, masukkan, lalu klik Atur Ulang.
  4. Tunggu sekitar 2 menit, lalu matikan dan nyalakan kembali printer tersebut.

FAQ – Epson XP-800

Why “Service required” returns soon after reset?

Heavy cleaning or intensive printing quickly raises the counter.

Will an external tank help?

It can delay saturation in heavy-duty use; optional, not mandatory.

Can I downgrade firmware to reset?

Not necessary — WicReset works at the service counter level.

Do trial keys fully unlock?

No — they reduce the counter partially (80–90%).

Can I move the printer during reset?

Avoid movement; keep USB stable until done.

Tips for Epson XP-800 reset

  • Atur ulang di sekitar ~95% untuk menghindari penguncian penuh.
  • Kurangi pembersihan kepala yang tidak perlu.
  • Gunakan kabel USB yang pendek dan berkualitas tinggi agar koneksinya stabil.

This page is dedicated to Epson XP-800 reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • Kabel USB

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” atau “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Tinggalkan Balasan

×

Cart