Sedikit penyegaran. Pencetakan yang jauh lebih banyak. Langsung dari Wic Reset Connect tim
Restore Epson XP-900 in Minutes – Waste Ink Counter Reset Tutorial

Restore Epson XP-900 in Minutes – Waste Ink Counter Reset Tutorial

If your Epson XP-900 shows Bantalan Tinta Perlu Diservis atau Diperlukan layanan (E11), the penghitung tinta sisa likely hit its limit. Use WicReset Connect + key to reset in ~2 minutes. Keys from 6 EUR, Windows 7–11, USB.

When Epson XP-900 Needs Reset – Symptoms

  • Printer tidak mau mencetak, lampu LED berkedip-kedip.
  • Acara Kesalahan E11 atau Diperlukan layanan.
  • Menampilkan peringatan: Bantalan Tinta Perlu Diservis.

Why Epson XP-900 stops

Epson XP-900 monitors maintenance waste via a penghitung tinta sisa. When the threshold is reached, the printer locks to avoid leakage. Resetting the counter usually restores normal operation; pads may not be actually full.

Quick facts – Epson XP-900 reset

ModelKesalahanSolusiSistem OperasiWaktu reset
Epson XP-900Kesalahan E11 / Bantalan Tinta Perlu DiservisWicReset ConnectWindows 7–11 (hanya USB)~2 menit

Download reset tool & driver

No verified official Epson driver found for Epson XP-900. Please refer to Panduan Pengaturan Epson untuk perangkat lunak yang kompatibel.

Video tutorial

▶ Tonton tutorial WicReset

Tersedia dalam berbagai bahasa dengan narasi.

Reset steps for Epson XP-900

  1. Connect Epson XP-900 to your PC via USB cable.
  2. Peluncuran WicReset Connect dan pastikan printer tersebut terdeteksi.
  3. Beli sebuah kunci reset, masukkan, lalu klik Atur Ulang.
  4. Tunggu sekitar 2 menit, lalu matikan dan nyalakan kembali printer tersebut.

FAQ – Epson XP-900

Why “Ink Pad Needs Service” appears?

Because the waste ink counter reached its limit.

What is the waste ink counter?

A software estimate of ink absorbed during maintenance/cleaning.

Is it safe to reset?

Yes — it only clears a software counter, no hardware is modified.

Will print quality improve?

Reset restores printing, but quality depends on maintenance and ink.

Do I need internet?

Yes — to validate your reset key online.

Tips for Epson XP-900 reset

  • Atur ulang di sekitar ~95% untuk menghindari penguncian penuh.
  • Kurangi pembersihan kepala yang tidak perlu.
  • Gunakan kabel USB yang pendek dan berkualitas tinggi agar koneksinya stabil.

This page is dedicated to Epson XP-900 reset instructions using WicReset Connect.

What you need

  • WicReset Connect key (only about €6 – the cheapest option)
  • Windows PC
  • Kabel USB

Time required

About 2 minutes

Difficulty

Very easy

Works for errors

  • Epson: E10, E11, E12, E91 and similar service errors
  • Canon: 1700, 5800 and similar waste ink / support code errors
  • Messages like “Waste ink counter full”, “Ink pad at the end of its service life”

Supported printer series

Epson: Artisan, B / BX, C / CX, D / DX, EP / EW, EcoTank (ET), K, L-series, M / ME, N / NX, P / PX / PM, Photo, R / RX, S / SC / SX, T / TX, WorkForce / WF and many other popular series.


Reset Epson ink pad service

If your Epson shows messages like “Ink pad is at the end of its service life”, “Ink pad service required” atau “Waste ink pad full”, you can reset the Epson ink pad service using a WicReset Connect key. The program resets the internal waste ink counter, so the printer works again without visiting a service center.

  • Fixes “Epson ink pad service” / “Service required” warnings in a few minutes.
  • Works as a reset Epson ink pad service solution for most EcoTank, L-series, ET-series, XP, WF and Stylus printers.
  • No hardware resetter needed – only a Windows PC, USB cable and WicReset Connect.

FAQ (short)

Q: Do I need to replace the physical ink pad?
A: In most home and office cases you only reset the waste ink counter with WicReset Connect and keep using the printer normally.

Q: Is this a one-time reset?
A: Each key resets the counter once. You can repeat the procedure in the future with another key if the message appears again.

Tinggalkan Balasan

×

Cart